CYP15G0401DXB-BGC Cypress Semiconductor Corp, CYP15G0401DXB-BGC Datasheet - Page 32

• Manufacturer Part Number: CYP15G0401DXB-BGC
• Description: IC TXRX HOTLINK 256LBGA
• Manufacturer: Cypress Semiconductor Corp
• Series: HOTlink II™r
• Type: Transceiverr

Specifications of CYP15G0401DXB-BGC

• Package / Case: 256-LBGA Exposed Pad, 32-HLBGA
• Number Of Drivers/receivers: 4/4
• Protocol: Multiprotocol
• Voltage - Supply: 3.135 V ~ 3.465 V
• Mounting Type: Surface Mount
• Product: PHY
• Supply Voltage (min): 3.135 V
• Supply Current: 1.06 A
• Maximum Operating Temperature: + 70 C
• Minimum Operating Temperature: 0 C
• Mounting Style: SMD/SMT
• Number Of Channels: 4
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: CYP15G0401DX-EVAL - IC TXRX HOTLINK 256-BGA
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

Document #: 38-02002 Rev. *L
Table 23. Receive character status when channels are operated in independent mode (RXMODE[1:0] = LL or LH)
Table 24. Receive character status when channels are operated to receive BIST Data
RXSTx[2:0]
RXSTx[2:0]
000
001
010
100
101
000
001
010
100
101
011
110
111
011
110
111
Priority
Priority
7
7
2
5
4
1
6
3
7
7
2
5
4
1
6
3
BIST Data Compare. Character compared correctly
BIST Command Compare. Character compared correctly
BIST Last Good. Last Character of BIST sequence detected and valid.
RESERVED for TEST
BIST Last Bad. Last Character of BIST sequence detected invalid.
BIST Start. Receive BIST is enabled on this channel, but character compares have not yet
commenced. This also indicates a PLL Out of Lock condition, and Elasticity Buffer
overflow/underflow conditions.
BIST Error. While comparing characters, a mismatch was found in one or more of the decoded
character bits.
BIST Wait. The receiver is comparing characters. but has not yet found the start of BIST character
to enable the LFSR.
Normal Character Received. The valid data character with the correct running disparity received
Special Code Detected. Special code other than the selected framing character or decoder
violation received
Receive Elasticity Buffer underrun/overrun
error. The receive elasticity buffer was not able to
add/drop a K28.5 or framing character.
Framing Character Detected. This indicates that a character matching the patterns identified as
a framing character was detected. The decoded value of this character is present on the associ-
ated output bus.
Codeword Violation. The character on the output bus is a C0.7. This indicates that the received
character cannot be decoded into any valid character.
PLL Out Of Lock Indication
Running Disparity Error. The character on the output bus is a C4.7, C1.7 or C2.7
INVALID
Type-A Status
(Receive BIST = Enabled)
Receive BIST Status
INVALID
CYW15G0401DXB
CYP15G0401DXB
CYV15G0401DXB
Type-B status
Page 32 of 53