N25Q128A11B1240F Numonyx - A DIVISION OF MICRON SEMICONDUCTOR PRODUCTS, INC., N25Q128A11B1240F Datasheet - Page 80

• Manufacturer Part Number: N25Q128A11B1240F
• Description: IC SRL FLASH 128MB NMX 24-BGA
• Manufacturer: Numonyx - A DIVISION OF MICRON SEMICONDUCTOR PRODUCTS, INC.
• Series: Forté™r

Specifications of N25Q128A11B1240F

• Format - Memory: FLASH
• Memory Type: FLASH
• Memory Size: 128M (16M x 8)
• Speed: 108MHz
• Interface: SPI, 3-Wire Serial
• Voltage - Supply: 1.7 V ~ 2 V
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 24-TBGA
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: N25Q128A11B1240F

Table 16.
Table 17.
Figure 10. Read identification instruction and data-out sequence
9.1.2
80/185
20h
Reserved Reserved Reserved
Bit 7
Manufacturer
Identification
Read Identification data-out sequence
Extended Device ID table (first byte)
Read Data Bytes (READ)
The device is first selected by driving Chip Select (S) Low. The instruction code for the Read
Data Bytes (READ) instruction is followed by a 3-byte address (A23-A0), each bit being
latched-in during the rising edge of Serial Clock (C). Then the memory contents, at that
address, is shifted out on Serial Data output (DQ1), each bit being shifted out, at a
maximum frequency fR, during the falling edge of Serial Clock (C).
The first byte addressed can be at any location. The address is automatically incremented
to the next higher address after each byte of data is shifted out. The whole memory can,
therefore, be read with a single Read Data Bytes (READ) instruction. When the highest
address is reached, the address counter rolls over to 000000h, allowing the read sequence
to be continued indefinitely.
The Read Data Bytes (READ) instruction is terminated by driving Chip Select (S) High. Chip
Select (S) can be driven High at any time during data output. Any Read Data Bytes (READ)
instruction, while an Erase, Program or Write cycle is in progress, is rejected without having
any effects on the cycle that is in progress.
Bit 6
Memory type
BBh
Bit 5
Device identification
VCR XIP bit setting:
0 = required,
1 = not required
Memory capacity
18h
Bit 4
Hold/Reset function:
0 = HOLD,
1 = Reset
EDID+CFD length
10h
Bit 3
Addressing:
0 = by Byte,
EDID
2 bytes
Bit 2
UID
Architecture:
00 = Uniform,
01 = Bottom,
11 = Top
CFD
14 bytes
Bit 1
Bit 0