UPD78F0988AGC-8BS Renesas Electronics America, UPD78F0988AGC-8BS Datasheet - Page 115

• Manufacturer Part Number: UPD78F0988AGC-8BS
• Manufacturer: Renesas Electronics America

Specifications of UPD78F0988AGC-8BS

• Lead Free Status / Rohs Status: Supplier Unconfirmed

(2) Capture/compare control register 00, 01 (CRC00, CRC01)
These registers control the operation of the 16-bit capture/compare registers (CR000, CR010, CR001, CR011).
CRC00 and CRC01 are set by a 1-bit or 8-bit memory manipulation instruction.
RESET input sets CRC00 and CRC01 to 00H.
Cautions 1. Timer operation must be stopped before setting CRC00.
CRC00
Symbol
2. When clear & start mode entered on a match between TM00 and CR000 is selected with 16-
3. If both the rising and falling edges are selected as the valid edges of TI000, capture is not
4. In order to ensure the capture operation, a pulse longer than two clocks of the count clock
bit timer mode control register 00 (TMC00), CR000 should not be specified as a capture
register.
performed.
specified by prescaler mode register 00 (PRM00) is required for a capture trigger.
CRC000
CRC002
CRC001
7
0
0
1
0
1
0
1
Figure 6-5. Format of Capture/Compare Control Register 00
Operates as capture register
Captures on inverted phase of valid edge of TI000
Operates as capture register
Operates as compare register
Captures on valid edge of TI010
Operates as compare register
0
6
CR010 operating mode selection
CR000 operating mode selection
CR000 capture trigger selection
0
5
CHAPTER 6 16-BIT TIMER/EVENT COUNTER
4
0
User’s Manual U13029EJ7V1UD
0
3
CRC002 CRC001 CRC000
2
1
0
Address
FF62H
After reset
00H
R/W
R/W
113