TXC-06101AILQ Transwitch Corporation, TXC-06101AILQ Datasheet - Page 84

• Manufacturer Part Number: TXC-06101AILQ
• Manufacturer: Transwitch Corporation

Specifications of TXC-06101AILQ

• Operating Temperature (min): -40C
• Operating Temperature Classification: Industrial
• Operating Temperature (max): 85C
• Package Type: PQFP
• Rad Hardened: No
• Lead Free Status / Rohs Status: Not Compliant

TX POH BYTES - Read/Write
Address [H]
Address [H]
1C1-1C7
180-1BF
14A-150
152-17F
1C0
1C8
1C9
147
148
149
151
Proprietary TranSwitch Corporation Information for use Solely by its Customers
Status Bits
Status Bits
Control Bits
Control Bits
J1SYNCEN
TXC1EXT
TSWRES
INHTB2C
J0RWEN
TC2EXT
TJ1EXT
TRERR
TRERR
J0EN0
J0EN1
TPATH
TPATH
TRC1
OA
Tx B2 Error Count: count of B2 Errors that are incoming at the Tx Ter-
minal Port. This is an 8-Bit, Clear on Read, Roll Over Counter. Counting
is inhibited upon declaration of TLOC, TLOS, TLOF, or TAIS-L or
INHTB2C.
NOT EQUIPPED
Tx B1 Error Mask: the contents of this location are 'exclusive-OR gated,
bit by bit, with the B1 Byte output at the Tx Line Port.
NOT EQUIPPED
Tx B2 Error Mask: the contents of this location are exclusive-OR gated,
bit by bit, with the B2 Byte output at the Tx Line Port.
NOT EQUIPPED
Tx Insert J0/J1: Line or Path Trace Bytes - information to be multiplexed
into Tx Line Port Data if insertion option is enabled or external data input
at Tx OA/TOH Port, Tx Terminal Port, or Tx POH Port.
J0 Processing
These locations are only used for J0 Messages if J0EN1 = "1". They
may be written by the µPro or optionally contain information input at the
Tx OA/TOH Port. If the Tx OA/TOH Port option is enabled and J0EN(1,0)
= "11" the byte immediately following an ASCII <CR> and <LF>, will be
stored in Location 180[H].
J1 Processing
These locations may be written by the µPro or contain information input
at either the Tx Terminal Port or the Tx POH Port. If either external
option is enabled and J1SYNCEN = "1", the byte immediately following
an ASCII <CR> and <LF> will be stored in Location 180[H].
Tx Term B3: information incoming at the Tx Terminal Port. This byte is
optionally processed as a B3 Parity Byte with Parity Errors accumulated
by the Tx B3 Error Counter. The Parity Calculation is even parity over all
SPE Bytes (the 27 TOH Bytes are excluded).
Tx Term C2, G1, F2, H4, Z3, Z4 and Z5: information incoming at the Tx
Terminal Port where : 1C1[H] = C2 and 1C7[H] = Z5
Internal Use - Do Not Access
Tx Insert C2: Signal Label Byte - information to be multiplexed into Tx
Line Port Data if insertion option is enabled. This location may be written
by the µPro or contain information input at the Tx POH Port.
- 84 of 196 -
DATA SHEET
Description
Description
TXC-06101
Ed. 3, April 2001
TXC-06101-MB
PHAST-1