TDA5252XT Infineon Technologies, TDA5252XT Datasheet - Page 56
![no-image](/images/manufacturer_photos/0/3/327/infineon_technologies_sml.jpg)
TDA5252XT
Manufacturer Part Number
TDA5252XT
Description
Manufacturer
Infineon Technologies
Datasheet
1.TDA5252XT.pdf
(86 pages)
Specifications of TDA5252XT
Operating Temperature (min)
-40C
Operating Temperature (max)
85C
Operating Temperature Classification
Industrial
Product Depth (mm)
4.4mm
Product Length (mm)
9.7mm
Operating Supply Voltage (min)
2.1V
Operating Supply Voltage (max)
5.5V
Lead Free Status / Rohs Status
Compliant
3.2.7
Quartz: fp=19.0625MHz; C1=8fF; C0=2.1pF; CL=20pF (typical values)
Cv1=8.2pF, Cv2=6.8pF, Cv3=22pF
Table 3-7
Table 3-8
Tolerance values in Table 3-8 are valid, if pin 21 is not connected. Establishing the connection to
pin 21 the tolerances increase.
Concerning the frequency tolerances of the whole system also crystal tolerances (tuning
tolerances, temperature stability, tolerance of C L ) have to be considered.
In addition to the chip tolerances also the crystal and external component tolerances have to be
considered in the tuning and non-tuning case.
In case of internal tuning: The crystal on the evaluation board has a temperature stability of +/-
20ppm (or +/- 18kHz of the RF), which must be added to the total tolerances.
In case of default setup (without internal tuning and without usage of pin 21) the temperature
stability and tuning tolerance of the crystal as well as the tolerance of the external capacitors (+/-
0.1pF) have to be added. The crystal on the evaluation board has a temperature stability of +/-
20ppm (means +/- 18kHz of the RF) and a tuning tolerance of +/- 10ppm (means +/- 9kHz of the
RF). The external capacitors add a tolerance of +/- 3.5ppm (or +/- 3.2kHz regarding to the RF).
The frequency stabilities of both the receiver and the transmitter and the modulation bandwidth set
the limit for the bandwidth of the IQ filter. To achieve a high receiver sensitivity and efficient
Data Sheet
Inductivity of the crystal oscillator
Internal capacitors (+/- 10%)
Supply Voltage (2.1...5.5V)
Supply Voltage(2.1...5.5V)
Temperature (-40...+85C)
Temperature (-40...+85C)
Frequency set accuracy
Chip and System Tolerances
Internal Tuning
Default Setup (without internal tuning & without Pin21 usage)
Total
Total
Part
Part
56
Frequency tolerance
Frequency tolerance
@ 915MHz
@ 915MHz
+/- 1.5kHz
+/- 1.5kHz
+/- 29kHz
+/- 39kHz
+/- 5kHz
+/- 8kHz
+/- 4kHz
+/- 5kHz
+/- 1kHz
Rel. tolerance
Rel. tolerance
+/- 1.6ppm
+/- 1.5ppm
+/- 4.5ppm
+/- 1.5ppm
+/- 33ppm
+/- 45ppm
+/- 6ppm
+/- 9ppm
+/- 6ppm
TDA5252 G2
Version 1.1
Application
2007-02-26