CY8C5466AXI-064 Cypress Semiconductor Corp, CY8C5466AXI-064 Datasheet - Page 41

• Manufacturer Part Number: CY8C5466AXI-064
• Manufacturer: Cypress Semiconductor Corp

Specifications of CY8C5466AXI-064

• Lead Free Status / Rohs Status: Compliant

7.5.1 CAN Features
Document Number: 001-66238 Rev. *A
CAN2.0A/B protocol implementation - ISO 11898 compliant
Listen Only mode
SW readable error counter and indicator
Sleep mode: Wake the device from sleep with activity on the
Rx pin
Supports two or three wire interface to external transceiver (Tx,
Rx, and Enable). The three-wire interface is compatible with
the Philips PHY; the PHY is not included on-chip. The three
wires can be routed to any I/O
Enhanced interrupt controller
Standard and extended frames with up to 8 bytes of data per
frame
Message filter capabilities
Remote Transmission Request (RTR) support
Programmable bit rate up to 1 Mbps
CAN receive and transmit buffers status
CAN controller error status including BusOff
CAN Node 1
PSoC
CAN_H
En
CAN Transceiver
CAN Controller
Drivers
CAN
Tx Rx
CAN_L
Figure 7-18. CAN Bus System Implementation
CAN Node 2
PRELIMINARY
CAN_H
CAN_L
7.5.2 Software Tools Support
CAN Controller configuration integrated into PSoC Creator:
Receive path
Transmit path
CAN Configuration walkthrough with bit timing analyzer
Receive filter setup
PSoC
16 receive buffers each with its own message filter
Enhanced hardware message filter implementation that
covers the ID, IDE and RTR
DeviceNet addressing support
Multiple receive buffers linkable to build a larger receive
message array
Automatic transmission request (RTR) response handler
Lost received message notification
Eight transmit buffers
Programmable transmit priority
Round robin
Fixed priority
Message transmissions abort capability
CAN Bus
®
5: CY8C54 Family Datasheet
CAN Node n
CAN_H
CAN_L
Page 41 of 105
[+] Feedback