AT32UC3C1512C Atmel Corporation, AT32UC3C1512C Datasheet - Page 199

• Manufacturer Part Number: AT32UC3C1512C
• Manufacturer: Atmel Corporation

Specifications of AT32UC3C1512C

• Flash (kbytes): 512 Kbytes
• Pin Count: 100
• Max. Operating Frequency: 66 MHz
• Cpu: 32-bit AVR
• # Of Touch Channels: 32
• Hardware Qtouch Acquisition: No
• Max I/o Pins: 81
• Ext Interrupts: 100
• Usb Transceiver: 1
• Quadrature Decoder Channels: 2
• Usb Speed: Full Speed
• Usb Interface: Device + OTG
• Spi: 7
• Twi (i2c): 3
• Uart: 5
• Can: 2
• Lin: 5
• Ssc: 1
• Ethernet: 1
• Graphic Lcd: No
• Video Decoder: No
• Camera Interface: No
• Adc Channels: 16
• Adc Resolution (bits): 12
• Adc Speed (ksps): 2000
• Analog Comparators: 4
• Resistive Touch Screen: No
• Dac Channels: 4
• Dac Resolution (bits): 12
• Temp. Sensor: No
• Crypto Engine: No
• Sram (kbytes): 68
• Self Program Memory: YES
• Dram Memory: No
• Nand Interface: No
• Picopower: No
• Temp. Range (deg C): -40 to 85
• I/o Supply Class: 3.0 to 3.6 or 4.5 to 5.5
• Operating Voltage (vcc): 3.0 to 3.6 or 4.5 to 5.5
• Fpu: Yes
• Mpu / Mmu: Yes / No
• Timers: 6
• Output Compare Channels: 22
• Input Capture Channels: 12
• Pwm Channels: 19
• 32khz Rtc: Yes
• Calibrated Rc Oscillator: Yes

32000D–04/2011
LDM – Load Multiple Registers
Architecture revision:
Architecture revision1 and higher.
Description
Loads the consecutive words pointed to by Rp into the registers specified in the instruction. The
PC can be loaded, resulting in a jump to the loaded target address. If PC is loaded, the return
value in R12 is tested and the flags are updated. The return value may optionally be set to -1, 0
or 1.
Operation:
I.
Loadaddress ← Rp;
if Reglist16[PC] == 1 then
else
for (i = 11 to 0)
if Opcode[++] == 1 then
if Rp == PC then
PC ← *(Loadaddress++);
if Rp == PC then
else
if Reglist16[LR] == 1
if Reglist16[SP] == 1
if Reglist16[R12] == 1
if Reglist16[i] == 1 then
if Rp == PC then
else
Loadaddress ← SP;
if Reglist16[LR,R12] == B’00
else if Reglist16[LR,R12] == B’01
else
Test R12 and update flags;
if Reglist16[LR] == 1
if Reglist16[SP] == 1
if Reglist16[R12] == 1
Test R12 and update flags;
LR ← *(Loadaddress++);
SP ← *(Loadaddress++);
R12 ← *(Loadaddress++);
Ri ←
SP ← Loadaddress;
Rp ← Loadaddress;
R12 ← 0;
R12 ← 1;
R12 ← −1;
LR ← *(Loadaddress++);
SP ← *(Loadaddress++);
R12 ← *(Loadaddress++);
*(Loadaddress++);
AVR32
199