SAM7S32 Atmel Corporation, SAM7S32 Datasheet - Page 62

• Manufacturer Part Number: SAM7S32
• Manufacturer: Atmel Corporation

Specifications of SAM7S32

• Flash (kbytes): 32 Kbytes
• Pin Count: 48
• Max. Operating Frequency: 55 MHz
• Cpu: ARM7TDMI
• Hardware Qtouch Acquisition: No
• Max I/o Pins: 21
• Ext Interrupts: 21
• Usb Speed: No
• Usb Interface: No
• Spi: 1
• Twi (i2c): 1
• Uart: 2
• Ssc: 1
• Graphic Lcd: No
• Video Decoder: No
• Camera Interface: No
• Adc Channels: 8
• Adc Resolution (bits): 10
• Adc Speed (ksps): 384
• Resistive Touch Screen: No
• Temp. Sensor: No
• Crypto Engine: No
• Sram (kbytes): 8
• Self Program Memory: NO
• Dram Memory: No
• Nand Interface: No
• Picopower: No
• Temp. Range (deg C): -40 to 85
• I/o Supply Class: 1.8/3.3
• Operating Voltage (vcc): 3.0 to 3.6
• Fpu: No
• Mpu / Mmu: no / no
• Timers: 3
• Output Compare Channels: 3
• Input Capture Channels: 3
• Pwm Channels: 4
• 32khz Rtc: Yes
• Calibrated Rc Oscillator: No

13.3.4.3
Figure 13-6. Brownout Reset State
62
SAM7S Series
periph_nreset
or bod_reset
Brownout Reset
proc_nreset
brown_out
(nrst_out)
RSTTYP
NRST
SLCK
MCK
When the brown_out/bod_reset signal is asserted, the Reset State Manager immediately enters
the Brownout Reset. In this state, the processor, the peripheral and the external reset lines are
asserted.
The Brownout Reset is left Y Slow Clock cycles after the rising edge of brown_out/bod_reset
after a two-cycle resynchronization. An external reset is also triggered.
When the processor reset is released, the field RSTTYP in RSTC_SR is loaded with the value
0x5, thus indicating that the last reset is a Brownout Reset.
Freq.
Any
Any
Resynch.
2 cycles
XXX
Processor Startup
= 3 cycles
EXTERNAL RESET LENGTH
8 cycles (ERSTL=2)
0x5 = Brownout Reset
6175L–ATARM–28-Jul-11