STG3005A2S STMicroelectronics, STG3005A2S Datasheet - Page 56

• Manufacturer Part Number: STG3005A2S
• Description: 128-BIT 3D MULTIMEDIA ACCELERATOR
• Manufacturer: STMicroelectronics

RIVA128ZX
[2]
[1]
[0]
The following example configuration is shown in Figure 65:
Figure 65. Example motherboard configuration
56/85
Subsystem Vendor ID initialized to 0 and writeable by system BIOS (see Appendix A, page 76)
8Mbit, 2 internal bank, SGRAM
128-bit framebuffer interface
AGP 2X mode enabled including 66MHz PCI 2.1 compliant subset
Using 13.5000MHz crystal
TV output mode is NTSC
RAM Type
0 = 16Mbit, 2 or 4 internal bank SGRAM or 16Mbit SDRAM. The BIOS should test the memory to
determine whether it supports 2 or 4 internal banks.
1 = 8Mbit, 2 internal bank SGRAM.
Although a 10K resistor is used to strap the default state of this bit in RIVA 128 and RIVA128ZX
reference designs, it is ignored by the video BIOS which auto-detects the memory type and con-
figures the RIVA128ZX appropriately.
Sub-Vendor. This bit indicates whether the PCI Subsystem Vendor field is located in the system
motherboard BIOS or adapter card VGA BIOS. If the Subsystem Vendor field is located in the sys-
tem BIOS it must be written by the system BIOS to the PCI configuration space prior to running
any PnP code.
0 = System BIOS (Subsystem Vendor ID and Subsystem ID set to 0x0000)
1 = Adapter card VGA BIOS (Subsystem Vendor ID and Subsystem ID read from ROM BIOS at
location 0x54 - 0x57)
Bus Speed. This bit indicates the value returned in the 66MHz bit in the PCI Configuration regis-
ters.
0 = RIVA128ZX PCI interface is 33MHz
1 = RIVA128ZX is 66MHz capable
RIVA128ZX
FBA[10]
FBA[0
FBA[1
FBA[2]
FBA[3]
FBA[4]
FBA[5]
FBA[6]
FBA[7]
FBA[8]
FBA[9]
10K
]
]
128-BIT 3D MULTIMEDIA ACCELERATOR
VDD (3.3V)
SGRAM
array