AMD-K6 AMD [Advanced Micro Devices], AMD-K6 Datasheet - Page 201

no-image

AMD-K6

Manufacturer Part Number
AMD-K6
Description
AMD-K6 Processor
Manufacturer
AMD [Advanced Micro Devices]
Datasheet

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
AMD-K6-2
Manufacturer:
AMD
Quantity:
20 000
Part Number:
AMD-K6-2/233AFR
Manufacturer:
AMD
Quantity:
20 000
Part Number:
AMD-K6-2/350AFR
Manufacturer:
AMD
Quantity:
20 000
Part Number:
AMD-K6-2/400AFR
Manufacturer:
SMC
Quantity:
4
Part Number:
AMD-K6-2/475ACK
Manufacturer:
CPGA
Quantity:
20 000
Part Number:
AMD-K6-2/533AFX
Manufacturer:
INTEL
Quantity:
37
Part Number:
AMD-K6-2/533AFX
Manufacturer:
AMD
Quantity:
20 000
20695H/0—March 1998
8.10
Inquire Cycles
Internal Snooping
Chapter 8
Cache Coherency
Different ways exist to maintain coherency between the system
memory and cache memories. Inquire cycles, internal snoops,
FLUSH#, WBINVD, INVD, and line replacements all prevent
inconsistencies between memories.
Inquire cycles are bus cycles initiated by system logic. These
inquiries ensure coherency between the caches and main
memory. In systems with multiple caching masters, system logic
maintains cache coherency by driving inquire cycles to the
processor. System logic initiates inquire cycles by asserting
AHOLD, BOFF#, or HOLD to obtain control of the address bus
and then driving EADS#, INV (optional), and an inquire
address (A[31:5]). This type of bus cycle causes the processor to
compare the tags for both its instruction and data caches with
the inquire address. If there is a hit to a shared or exclusive line
in the data cache or a valid line in the instruction cache, the
processor asserts HIT#. If the compare hits a modified line in
the data cache, the processor asserts HIT# and HITM#. If
HITM# is asserted, the processor writes the modified line back
to memory. If INV was sampled asserted with EADS#, a hit
invalidates the line. If INV was sampled negated with EADS#, a
hit leaves the line in the shared state or transitions it from the
exclusive or modified to shared state.
Internal snooping is initiated by the processor (rather than
system logic) during certain cache accesses. It is used to
maintain coherency between the L1 instruction and data
caches.
The processor automatically snoops its instruction cache during
read or write misses to its data cache, and it snoops its data
cache during read misses to its instruction cache. Table 31 on
page 185 summarizes the actions taken during this internal
snooping.
If an internal snoop hits its target, the processor does the
following:
Data cache snoop during an instruction-cache read miss—If
modified, the line in the data cache is written back to
memory. Regardless of its state, the data-cache line is
invalidated and the instruction cache performs a burst cycle
read from memory.
Cache Organization
AMD-K6
®
Processor Data Sheet
183

Related parts for AMD-K6