LM3S2965-IQN25-A0T ETC2 [List of Unclassifed Manufacturers], LM3S2965-IQN25-A0T Datasheet - Page 109

• Manufacturer Part Number: LM3S2965-IQN25-A0T
• Description: Microcontroller
• Manufacturer: ETC2 [List of Unclassifed Manufacturers]

Run Mode Clock Gating Control Register 2 (RCGC2)
Base 0x400F.E000
Offset 0x108
Type R/W, reset 0x00000000
June 04, 2007
Reset
Reset
Type
Type
Bit/Field
31:8
7
6
5
4
3
2
RO
RO
31
15
0
0
Register 24: Run Mode Clock Gating Control Register 2 (RCGC2), offset 0x108
This register controls the clock gating logic. Each bit controls a clock enable for a given interface,
function, or unit. If set, the unit receives a clock and functions. Otherwise, the unit is unclocked and
disabled (saving power). If the unit is unclocked, reads or writes to the unit will generate a bus fault.
The reset state of these bits is 0 (unclocked) unless otherwise noted, so that all functional units are
disabled. It is the responsibility of software to enable the ports necessary for the application. Note
that these registers may contain more bits than there are interfaces, functions, or units to control.
This is to assure reasonable code compatibility with other family and future parts. RCGC2 is the
clock configuration register for running operation, SCGC2 for Sleep operation, and DCGC2 for
Deep-Sleep operation. Setting the ACG bit in the Run-Mode Clock Configuration (RCC) register
specifies that the system uses sleep modes.
RO
RO
30
14
0
0
reserved
GPIOG
GPIOH
GPIOF
GPIOE
GPIOD
GPIOC
Name
RO
RO
29
13
0
0
RO
RO
28
12
0
0
reserved
RO
RO
Type
27
11
R/W
R/W
R/W
R/W
R/W
R/W
0
0
RO
RO
RO
26
10
0
0
Reset
0
0
0
0
0
0
0
RO
RO
25
0
9
0
Preliminary
Description
Software should not rely on the value of a reserved bit. To provide
compatibility with future products, the value of a reserved bit should be
preserved across a read-modify-write operation.
This bit controls the clock gating for Port H. If set, the unit receives a
clock and functions. Otherwise, the unit is unclocked and disabled. If
the unit is unclocked, reads or writes to the unit will generate a bus fault.
This bit controls the clock gating for Port G. If set, the unit receives a
clock and functions. Otherwise, the unit is unclocked and disabled. If
the unit is unclocked, reads or writes to the unit will generate a bus fault.
This bit controls the clock gating for Port F. If set, the unit receives a
clock and functions. Otherwise, the unit is unclocked and disabled. If
the unit is unclocked, reads or writes to the unit will generate a bus fault.
This bit controls the clock gating for Port E. If set, the unit receives a
clock and functions. Otherwise, the unit is unclocked and disabled. If
the unit is unclocked, reads or writes to the unit will generate a bus fault.
This bit controls the clock gating for Port D. If set, the unit receives a
clock and functions. Otherwise, the unit is unclocked and disabled. If
the unit is unclocked, reads or writes to the unit will generate a bus fault.
This bit controls the clock gating for Port C. If set, the unit receives a
clock and functions. Otherwise, the unit is unclocked and disabled. If
the unit is unclocked, reads or writes to the unit will generate a bus fault.
RO
RO
24
0
8
0
reserved
GPIOH
R/W
RO
23
0
7
0
GPIOG
R/W
RO
22
0
6
0
GPIOF
R/W
RO
21
0
5
0
GPIOE
R/W
RO
20
0
4
0
LM3S2965 Microcontroller
GPIOD
R/W
RO
19
0
3
0
GPIOC
R/W
RO
18
0
2
0
GPIOB
R/W
RO
17
0
1
0
GPIOA
R/W
RO
16
0
0
0
109