C8051F709-GQR Silicon Labs, C8051F709-GQR Datasheet - Page 84

• Manufacturer Part Number: C8051F709-GQR
• Description: 8-bit Microcontrollers - MCU 8kB 32B EEPROM Cap Sense
• Manufacturer: Silicon Labs

Specifications of C8051F709-GQR

• Rohs: yes
• Core: 8051
• Processor Series: C8051
• Data Bus Width: 8 bit

C8051F70x/71x
15.5. CS0 Comparator
The CS0 comparator compares the latest capacitive sense conversion result with the value stored in
CS0THH:CS0THL. If the result is less than or equal to the stored value, the CS0CMPF bit(CS0CN:0) is set
to 0. If the result is greater than the stored value, CS0CMPF is set to 1.
If the CS0 conversion accumulator is configured to accumulate multiple conversions, a comparison will not
be made until the last conversion has been accumulated.
An interrupt will be generated if CS0 greater-than comparator interrupts are enabled by setting the ECS-
GRT bit (EIE2.1) when the comparator sets CS0CMPF to 1.
If auto-scan is running when the comparator sets the CS0CMPF bit, no further auto-scan initiated conver-
sions will start until firmware sets CS0BUSY to 1.
A CS0 greater-than comparator event can wake a device from suspend mode. This feature is useful in sys-
tems configured to continuously sample one or more capacitive sense channels. The device will remain in
the low-power suspend state until the captured value of one of the scanned channels causes a CS0
greater-than comparator event to occur. It is not necessary to have CS0 comparator interrupts enabled in
order to wake a device from suspend with a greater-than event.
For a summary of behavior with different CS0 comparator, auto-scan, and auto accumulator settings,
please see Table 15.2.
84
Rev. 1.0