TDGL007 Microchip Technology, TDGL007 Datasheet - Page 35

• Manufacturer Part Number: TDGL007
• Description: Development Boards & Kits - PIC / DSPIC DIGILENT CEREBOT MC7 MOTOR CONTROL BRD
• Manufacturer: Microchip Technology

Specifications of TDGL007

• Product: Development Boards
• Interface Type: CAN, I2C
• Operating Supply Voltage: 5 V

3.6.2.4
In addition to adder/subtracter saturation, writes to data
space can also be saturated – but without affecting the
contents of the source accumulator. The data space
write saturation logic block accepts a 16-bit, 1.15 frac-
tional value from the round logic block as its input,
together with overflow status from the original source
(accumulator) and the 16-bit round adder. These inputs
are combined and used to select the appropriate
1.15 fractional value as output to write to data space
memory.
If the SATDW bit in the CORCON register is set, data
(after rounding or truncation) is tested for overflow and
adjusted accordingly. For input data greater than
0x007FFF, data written to memory is forced to the max-
imum positive 1.15 value, 0x7FFF. For input data less
than 0xFF8000, data written to memory is forced to the
maximum negative 1.15 value, 0x8000. The Most
Significant bit of the source (bit 39) is used to determine
the sign of the operand being tested.
If the SATDW bit in the CORCON register is not set, the
input data is always passed through unmodified under
all conditions.
© 2011 Microchip Technology Inc.
Data Space Write Saturation
dsPIC33FJXXXMCX06A/X08A/X10A
3.6.3
The barrel shifter is capable of performing up to 16-bit
arithmetic or logic right shifts, or up to 16-bit left shifts
in a single cycle. The source can be either of the two
DSP accumulators or the X bus (to support multi-bit
shifts of register or memory data).
The shifter requires a signed binary value to determine
both the magnitude (number of bits) and direction of the
shift operation. A positive value shifts the operand right.
A negative value shifts the operand left. A value of ‘0’
does not modify the operand.
The barrel shifter is 40 bits wide, thereby obtaining a
40-bit result for DSP shift operations and a 16-bit result
for MCU shift operations. Data from the X bus is
presented to the barrel shifter between bit positions
16 to 31 for right shifts and between bit positions 0 to
16 for left shifts.
BARREL SHIFTER
DS70594C-page 35