MT28F320J3RG-11 GMET TR Micron Technology Inc, MT28F320J3RG-11 GMET TR Datasheet - Page 8

• Manufacturer Part Number: MT28F320J3RG-11 GMET TR
• Description: IC FLASH 32MBIT 110NS 56TSOP
• Manufacturer: Micron Technology Inc

Specifications of MT28F320J3RG-11 GMET TR

• Format - Memory: FLASH
• Memory Type: FLASH
• Memory Size: 32M (4Mx8, 2Mx16)
• Speed: 110ns
• Interface: Parallel
• Voltage - Supply: 2.7 V ~ 3.6 V
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 56-TSOP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Part Numbering Information
different combinations of features (see Figure 4).
NOTE:
Valid Part Number Combinations
ber chart above, please go to Micron’s Part Marking
Decoder Web site at
verify that the part number is offered and valid. If the
device required is not on this list, please contact the
factory.
09005aef80b5a323
MT28F640J3.fm – Rev. N 3/05 EN
1. Lead-free packages are available. Contact factory for details.
Micron’s Flash devices are available with several
After building the part number from the part num-
Flash Family
28F = Dual-Supply
Density/Organization
XXX = x8/x16 selectable
(XXX = 320, 640, 128)
Micron Technology
Voltage/Block Organization
J3 = Smart 3 (2.70V–3.60V V
Even sectored, compatible with Intel StrataFlash
Package Code
TSOP
RG = 56-pin (standard) TSOP Type I
FBGA (standard)
FS = 64-ball (standard) FBGA
(8 x 8 grid, 1.00mm pitch, 10mm x 13mm)
(Compatible with Intel‘s Easy BGA package)
www.micron.com/partsearch
CC/
2.70V–3.60V)
MT 28F 320 J3 RG -11
Figure 4: Part Number Chart
®
“J3”
to
RP = 56-pin (lead-free) TSOP Type I
BS = 64-ball (lead-free) FBGA
(8 x 8 grid, 1.00mm pitch, 10mm x 13mm)
(Compatible with Intel’s Easy BGA package)
8
Device Marking
part number is not printed on the top of each device.
Instead, an abbreviated device mark comprised of a
five-digit alphanumeric code is used. The abbreviated
device marks are cross-referenced to the Micron part
numbers at
location of the abbreviated mark on the device, please
refer to customer service note CSN-11, “Product Mark/
Label,” at www.micron.com/csn.
Due to the size of the package, the Micron standard
ET
Micron Technology, Inc., reserves the right to change products or specifications without notice.
www.micron.com/partsearch.
Operating Temperature Range
Manufacturer’s Identification Code
None = Intel (89h)
Access Time
-11 = 110ns
-115 =115ns
-12 = 120ns
ET = Extended (-40ºC to +85ºC)
M = Micron (2Ch)
128Mb, 64Mb, 32Mb
Q-FLASH MEMORY
©2000 Micron Technology. Inc.
To view the