THNCF512MDG Toshiba, THNCF512MDG Datasheet - Page 28

• Manufacturer Part Number: THNCF512MDG
• Description: MEMORY CARD COMPACT FLASH 512MB
• Manufacturer: Toshiba

Specifications of THNCF512MDG

• Memory Size: 512MB
• Memory Type: CompactFLASH
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

(10) Read Multiple (code: C4h):
(11) Read Long Sector (code 22h or 23h):
(12) Read Sector(s) (code 20h or 21h):
(13) Read Verify Sector(s) (code: 40h or 41h):
(14) Recalibrate (code: 1Xh):
(15) Request Sense (code: 03h):
(16) Seek (code: 7Xh):
(17) Set Features (code: EFh):
(6) Idle (code: E3h or 97h):
(7) Idle Immediate (code: E1h or 95h):
(8) Initialize Drive Parameters (code: 91h):
(9) Read Buffer (code: E4h):
This command causes the Card to set BSY, enter the Idle mode, clear BSY and generate an interrupt.
If sector count is non-zero, the automatic power down mode is enabled. If the sector count is zero, the
automatic power mode is disabled.
This command causes the Card to set BSY, enter the Idle(Read) mode, clear BSY and generate an
interrupt.
This command enables the host to set the number of sectors per track and the number of heads per
cylinder.
This command enables the host to read the current contents of the card’s sector buffer.
This command performs similarly to the Read Sectors command. Interrupts are not generated on each
sector, but on the transfer of a block, which contains the number of sectors defined by a Set Multiple
command.
data instead of 512 bytes.
This command reads from 1 to 256 sectors as specified in the Sector Count register. A sector count of
0 requests 256 sectors. The transfer beings specified in the Sector Number register.
This command is identical to the Read Sectors command, except that DRQ is never set and no data is
transferred to the host.
This command is effectively a NOP command to the Card and is provided for compatibility purposes.
This command requests an extended error code after command ends with an error.
This command is effectively a NOP command to the Card although it does perform a range check.
This command is used by the host to establish or select certain features.
Features
This command performs similarly to the Read Sector(s) command except that it returns 516 bytes of
CCH
BBH
0AH
8AH
9AH
01H
03H
05H
09H
44H
55H
66H
69H
81H
85H
89H
96H
97H
Enable 8-bit data transfers.
Set transfer mode base on value in sector count register
Enable Advanced Power Management
Enable Extended Power operations.
Enable Level 1 commands
Product specific ECC bytes apply on Read/Write Long commands
Disable Read Look Ahead.
Disable Power on Reset (POR) establishment of defaults at Soft Reset.
NOP – Accepted for backward compatibility
Disable 8-bit data transfers.
Disable Advanced Power Management
Disable Extended Power operations
Disable Power Level 1 commands
NOP – Accepted for backward compatibility
Accepted for backward compatibility. Use od this Feature is not recommended.
Set the host current source capability. Allows tradeoff between current drawn and read/write speed
4 bytes of data apply on Read/Write Long commands.
Enable Power on Reset (POR) establishment of defaults at Soft Reset.
TENTATIVE
Operation
THNCFxxxxDG Series
2004-05-18 28/44