DSPIC30F1010-30I/SO Microchip Technology, DSPIC30F1010-30I/SO Datasheet - Page 115

• Manufacturer Part Number: DSPIC30F1010-30I/SO
• Description: IC DSPIC MCU/DSP 6K 28SOIC
• Manufacturer: Microchip Technology
• Series: dsPIC™ 30Fr

Specifications of DSPIC30F1010-30I/SO

• Core Processor: dsPIC
• Core Size: 16-Bit
• Speed: 30 MIPs
• Connectivity: I²C, IrDA, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 21
• Program Memory Size: 6KB (2K x 24)
• Program Memory Type: FLASH
• Ram Size: 256 x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Data Converters: A/D 6x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 28-SOIC (7.5mm Width)
• Data Bus Width: 16 bit
• Processor Series: DSPIC30F
• Core: dsPIC
• 3rd Party Development Tools: 52713-733, 52714-737, 53276-922, EWDSPIC
• Development Tools By Supplier: PG164130, DV164035, DV244005, DV164005, PG164120, DM240002, DM300023, DM330011
• Package: 28SOIC W
• Device Core: dsPIC
• Family Name: dsPIC30
• Maximum Speed: 30 MHz
• Operating Supply Voltage: 3.3|5 V
• Number Of Programmable I/os: 21
• Interface Type: I2C/SPI/UART
• On-chip Adc: 6-chx10-bit
• Number Of Timers: 2
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: DM300023 - KIT DEMO DSPICDEM SMPS BUCKDV164005 - KIT ICD2 SIMPLE SUIT W/USB CABLE
• Eeprom Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

REGISTER 12-5:
REGISTER 12-6:
© 2006 Microchip Technology Inc.
bit 11
bit 10
bit 9
bit 8
bit 7-6
bit 5-2
bit 1
bit 0
bit 15
bit 7
Legend:
R = Readable bit
-n = Value at POR
bit 15-0
Note 1:
R/W-0
R/W-0
The minimum value for this register is 0x0008 and the maximum value is 0xFFEF.
CLIEN: Current-Limit Interrupt Enable bit
1 = Current-limit interrupt enabled
0 = Current-limit interrupt disabled and CLSTAT bit is cleared
TRGIEN: Trigger Interrupt Enable bit
1 = A trigger event generates an interrupt request
0 = Trigger event interrupts are disabled and TRGSTAT bit is cleared
ITB: Independent Time Base Mode bit
1 = Phasex register provides time base period for this PWM generator
0 = Primary time base provides timing for this PWM generator
MDCS: Master Duty Cycle Register Select bit
1 = MDC register provides duty cycle information for this PWM generator
0 = DCx register provides duty cycle information for this PWM generator
DTC<1:0>: Dead-time Control bits
00 = Positive dead time actively applied for all output modes
01 = Negative dead time actively applied for all output modes
10 = Dead-time function is disabled
11 = Reserved
Unimplemented: Read as ‘0’
XPRES: External PWM Reset Control bit
1 = Current-limit source resets time base for this PWM generator if it is in independent time base
0 = External pins do not affect PWM time base
IUE: Immediate Update Enable bit
1 = Updates to the active PDC registers are immediate
0 = Updates to the active PDC registers are synchronized to the PWM time base
PWM Generator #x Duty Cycle Value bits
R/W-0
R/W-0
mode
PWMCONx: PWM CONTROL REGISTER (CONTINUED)
PDCx: PWM GENERATOR DUTY CYCLE REGISTER
W = Writable bit
‘1’ = Bit is set
R/W-0
R/W-0
R/W-0
R/W-0
Preliminary
PDCx<15:8>
PDCx<7:0>
(1)
U = Unimplemented bit, read as ‘0’
‘0’ = Bit is cleared
R/W-0
R/W-0
dsPIC30F1010/202X
R/W-0
R/W-0
x = Bit is unknown
R/W-0
R/W-0
DS70178C-page 113
R/W-0
R/W-0
bit 8
bit 0