PIC18LF25K22-I/SP Microchip Technology, PIC18LF25K22-I/SP Datasheet - Page 182

• Manufacturer Part Number: PIC18LF25K22-I/SP
• Description: MCU 8BIT 32KB FLASH 3.6V 28SDIP
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 18Fr

Specifications of PIC18LF25K22-I/SP

• Program Memory Type: FLASH
• Program Memory Size: 32KB (16K x 16)
• Package / Case: 28-DIP (0.300", 7.62mm)
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 64MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, HLVD, POR, PWM, WDT
• Number Of I /o: 24
• Eeprom Size: 256 x 8
• Ram Size: 1.5K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 3.6 V
• Data Converters: A/D 19x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC18LF
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 1536 B
• Interface Type: I2C, SPI, EUSART
• Maximum Clock Frequency: 64 MHz
• Number Of Programmable I/os: 25
• Number Of Timers: 7
• Operating Supply Voltage: 1.8 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: Through Hole
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: PG164130, DV164005
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 17 Channel
• On-chip Dac: 5 bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

PIC18(L)F2X/4XK22
14.2.4
When Special Event Trigger mode is selected
(CCPxM<3:0> = 1011),
TMRxH:TMRxL and the CCPRxH:CCPRxL registers
occurs, all CCPx and ECCPx modules will immediately:
• Set the CCP interrupt flag bit – CCPxIF
• CCP5 will start an ADC conversion, if the ADC is
On the next TimerX rising clock edge:
• A Reset of TimerX register pair occurs –
This Special Event Trigger mode does not:
• Assert control over the CCPx or ECCPx pins.
• Set the TMRxIF interrupt bit when the
If the value of the CCPRxH:CCPRxL registers are
modified when a match occurs, the user should be
aware that the automatic reset of TimerX occurs on the
next rising edge of the clock. Therefore, modifying the
CCPRxH:CCPRxL registers before this reset occurs
will allow the TimerX to continue without being reset,
inadvertently resulting in the next event being
advanced or delayed.
The
CCPRxH:CCPRxL register pair to effectively provide a
16-bit programmable period register for TimerX.
TABLE 14-5:
DS41412D-page 182
CCP1CON
CCP2CON
CCP3CON
CCP4CON
CCP5CON
CCPR1H
CCPR1L
CCPR2H
CCPR2L
CCPR3H
CCPR3L
CCPR4H
CCPR4L
CCPR5H
CCPR5L
CCPTMRS0
CCPTMRS1
INTCON
Legend: — = Unimplemented location, read as ‘0’. Shaded bits are not used by Capture mode.
Note
enabled
TMRxH:TMRxL = 0x0000,
TMRxH:TMRxL register pair is reset. (TMRxIF
gets set on a TimerX overflow.)
Name
Special
1:
These registers/bits are available on PIC18(L)F4XK22 devices.
SPECIAL EVENT TRIGGER
GIE/GIEH
Event
Bit 7
REGISTERS ASSOCIATED WITH COMPARE
—
—
—
C3TSEL<1:0>
P1M<1:0>
P2M<1:0>
P3M<1:0>
Trigger
and
PEIE/GIEL
Bit 6
—
—
—
a
mode
match
Capture/Compare/PWM Register 1 High Byte (MSB)
Capture/Compare/PWM Register 2 High Byte (MSB)
Capture/Compare/PWM Register 3 High Byte (MSB)
Capture/Compare/PWM Register 4 High Byte (MSB)
Capture/Compare/PWM Register 5 High Byte (MSB)
Capture/Compare/PWM Register 1 Low Byte (LSB)
Capture/Compare/PWM Register 2 Low Byte (LSB)
Capture/Compare/PWM Register 3 Low Byte (LSB)
Capture/Compare/PWM Register 4 Low Byte (LSB)
Capture/Compare/PWM Register 5 Low Byte (LSB)
TMR0IE
Bit 5
allows
—
—
DC1B<1:0>
DC2B<1:0>
DC3B<1:0>
DC4B<1:0>
DC5B<1:0>
of
Preliminary
the
the
INT0IE
Bit 4
—
C2TSEL<1:0>
14.2.5
The Compare mode is dependent upon the system
clock (F
down during Sleep mode, the Compare mode will not
function properly during Sleep.
RBIE
Bit 3
C5TSEL<1:0>
OSC
COMPARE DURING SLEEP
) for proper operation. Since F
TMR0IF
Bit 2
CCP1M<3:0>
CCP2M<3:0>
CCP3M<3:0>
CCP4M<3:0>
CCP5M<3:0>
—
 2010 Microchip Technology Inc.
INT0IF
Bit 1
C1TSEL<1:0>
C4TSEL<1:0>
RBIF
Bit 0
OSC
Register
on Page
is shut
201
201
201
201
201
204
204
115
—
—
—
—
—
—
—
—
—
—