PIC18LF25K22-I/SP Microchip Technology, PIC18LF25K22-I/SP Datasheet - Page 357

• Manufacturer Part Number: PIC18LF25K22-I/SP
• Description: MCU 8BIT 32KB FLASH 3.6V 28SDIP
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 18Fr

Specifications of PIC18LF25K22-I/SP

• Program Memory Type: FLASH
• Program Memory Size: 32KB (16K x 16)
• Package / Case: 28-DIP (0.300", 7.62mm)
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 64MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, HLVD, POR, PWM, WDT
• Number Of I /o: 24
• Eeprom Size: 256 x 8
• Ram Size: 1.5K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 3.6 V
• Data Converters: A/D 19x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC18LF
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 1536 B
• Interface Type: I2C, SPI, EUSART
• Maximum Clock Frequency: 64 MHz
• Number Of Programmable I/os: 25
• Number Of Timers: 7
• Operating Supply Voltage: 1.8 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: Through Hole
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: PG164130, DV164005
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 17 Channel
• On-chip Dac: 5 bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

REGISTER 24-9:
REGISTER 24-10: CONFIG7L: CONFIGURATION REGISTER 7 LOW
 2010 Microchip Technology Inc.
bit 7
Legend:
R = Readable bit
-n = Value when device is unprogrammed
bit 7
bit 6
bit 5
bit 4-0
Note 1:
bit 7
Legend:
R = Readable bit
-n = Value when device is unprogrammed
bit 7-4
bit 3
bit 2
bit 1
bit 0
Note 1:
WRTD
R/C-1
U-0
—
This bit is read-only in normal execution mode; it can be written only in Program mode.
Available on PIC18(L)FX5K22 and PIC18(L)FX6K22 devices.
WRTD: Data EEPROM Write Protection bit
1 = Data EEPROM not write-protected
0 = Data EEPROM write-protected
WRTB: Boot Block Write Protection bit
1 = Boot Block not write-protected
0 = Boot Block write-protected
WRTC: Configuration Register Write Protection bit
1 = Configuration registers not write-protected
0 = Configuration registers write-protected
Unimplemented: Read as ‘0’
Unimplemented: Read as ‘0’
EBTR3: Table Read Protection bit
1 = Block 3 not protected from table reads executed in other blocks
0 = Block 3 protected from table reads executed in other blocks
EBTR2: Table Read Protection bit
1 = Block 2 not protected from table reads executed in other blocks
0 = Block 2 protected from table reads executed in other blocks
EBTR1: Table Read Protection bit
1 = Block 1 not protected from table reads executed in other blocks
0 = Block 1 protected from table reads executed in other blocks
EBTR0: Table Read Protection bit
1 = Block 0 not protected from table reads executed in other blocks
0 = Block 0 protected from table reads executed in other blocks
WRTB
R/C-1
U-0
—
CONFIG6H: CONFIGURATION REGISTER 6 HIGH
WRTC
R-1
U-0
—
(1)
U-0
U-0
(1)
(1)
Preliminary
—
—
U = Unimplemented bit, read as ‘0’
C = Clearable only bit
U = Unimplemented bit, read as ‘0’
C = Clearable only bit
EBTR3
R/C-1
U-0
—
PIC18(L)F2X/4XK22
(1)
(1)
EBTR2
R/C-1
U-0
—
(1)
EBTR1
R/C-1
U-0
—
DS41412D-page 357
EBTR0
R/C-1
U-0
—
bit 0
bit 0