PIC18LF25K22-I/SP Microchip Technology, PIC18LF25K22-I/SP Datasheet - Page 3

• Manufacturer Part Number: PIC18LF25K22-I/SP
• Description: MCU 8BIT 32KB FLASH 3.6V 28SDIP
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 18Fr

Specifications of PIC18LF25K22-I/SP

• Program Memory Type: FLASH
• Program Memory Size: 32KB (16K x 16)
• Package / Case: 28-DIP (0.300", 7.62mm)
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 64MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, HLVD, POR, PWM, WDT
• Number Of I /o: 24
• Eeprom Size: 256 x 8
• Ram Size: 1.5K x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 3.6 V
• Data Converters: A/D 19x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Processor Series: PIC18LF
• Core: PIC
• Data Bus Width: 8 bit
• Data Ram Size: 1536 B
• Interface Type: I2C, SPI, EUSART
• Maximum Clock Frequency: 64 MHz
• Number Of Programmable I/os: 25
• Number Of Timers: 7
• Operating Supply Voltage: 1.8 V to 3.6 V
• Maximum Operating Temperature: + 85 C
• Mounting Style: Through Hole
• 3rd Party Development Tools: 52715-96, 52716-328, 52717-734, 52712-325, EWPIC18
• Development Tools By Supplier: PG164130, DV164005
• Minimum Operating Temperature: - 40 C
• On-chip Adc: 10 bit, 17 Channel
• On-chip Dac: 5 bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

High-Performance RISC CPU:
• C Compiler Optimized Architecture:
• Up to 1024 Bytes Data EEPROM
• Up to 64 Kbytes Linear Program Memory
• Up to 3896 Bytes Linear Data Memory Address-
• Up to 16 MIPS Operation
• 16-bit Wide Instructions, 8-bit Wide Data Path
• Priority Levels for Interrupts
• 31-Level, Software Accessible Hardware Stack
• 8 x 8 Single-Cycle Hardware Multiplier
Flexible Oscillator Structure:
• Precision 16 MHz Internal Oscillator Block:
• Four Crystal modes up to 64 MHz
• Two External Clock modes up to 64 MHz
• 4X Phase Lock Loop (PLL)
• Secondary Oscillator using Timer1 @ 32 kHz
• Fail-Safe Clock Monitor:
Analog Features:
• Analog-to-Digital Converter (ADC) module:
• Analog Comparator module:
• Digital-to-Analog Converter (DAC) module:
• Charge Time Measurement Unit (CTMU) module:
 2010 Microchip Technology Inc.
- Optional extended instruction set designed to
Addressing
ing
- Factory calibrated to ± 1%
- Selectable frequencies, 31 kHz to 16 MHz
- 64 MHz performance available using PLL –
- Allows for safe shutdown if peripheral clock
- Two-Speed Oscillator Start-up
- 10-bit resolution, up to 30 external channels
- Auto-acquisition capability
- Conversion available during Sleep
- Fixed Voltage Reference (FVR) channel
- Independent input multiplexing
- Two rail-to-rail analog comparators
- Independent input multiplexing
- Fixed Voltage Reference (FVR) with 1.024V,
- 5-bit rail-to-rail resistive DAC with positive
- Supports capacitive touch sensing for touch
optimize re-entrant code
no external components required
stops
2.048V and 4.096V output levels
and negative reference selection
screens and capacitive switches
Microcontrollers with nanoWatt XLP Technology
28/40/44-Pin, Low-Power, High-Performance
Preliminary
PIC18(L)F2X/4XK22
Extreme Low-Power Management
with nanoWatt XLP:
• Sleep mode: 20 nA, typical
• Watchdog Timer: 300 nA, typical
• Timer1 Oscillator: 800 nA @ 32 kHz
• Peripheral Module Disable
Special Microcontroller Features:
• Full 5.5V Operation – PIC18FXXK22 devices
• 1.8V to 3.6V Operation – PIC18LFXXK22 devices
• Self-Programmable under Software Control
• High/Low-Voltage Detection (HLVD) module:
• Programmable Brown-out Reset (BOR):
• Extended Watchdog Timer (WDT):
• In-Circuit Serial Programming™ (ICSP™):
• In-Circuit Debug (ICD)
Peripheral Highlights:
• Up to 35 I/O Pins plus 1 Input-Only Pin:
• SR Latch:
• Two Capture/Compare/PWM (CCP) modules
• Three Enhanced CCP (ECCP) modules:
• Two Master Synchronous Serial Port (MSSP)
- Programmable 16-Level
- Interrupt on High/Low-Voltage Detection
- With software enable option
- Configurable shutdown in Sleep
- Programmable period from 4 ms to 131s
- Single-Supply 3V
- High-Current Sink/Source 25 mA/25 mA
- Three programmable external interrupts
- Four programmable interrupt-on-change
- Nine programmable weak pull-ups
- Programmable slew rate
- Multiple Set/Reset input options
- One, two or four PWM outputs
- Selectable polarity
- Programmable dead time
- Auto-Shutdown and Auto-Restart
- PWM steering
modules:
- 3-wire SPI (supports all 4 modes)
- I
mask
2
C™ Master and Slave modes with address
DS41412D-page 3