DSPIC33FJ12MC202-I/ML Microchip Technology, DSPIC33FJ12MC202-I/ML Datasheet - Page 26

• Manufacturer Part Number: DSPIC33FJ12MC202-I/ML
• Description: IC DSPIC MCU/DSP 12K 28QFN
• Manufacturer: Microchip Technology
• Series: dsPIC™ 33Fr

Specifications of DSPIC33FJ12MC202-I/ML

• Core Processor: dsPIC
• Core Size: 16-Bit
• Speed: 40 MIPs
• Connectivity: I²C, IrDA, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, Motor Control PWM, QEI, POR, PWM, WDT
• Number Of I /o: 21
• Program Memory Size: 12KB (12K x 8)
• Program Memory Type: FLASH
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 6x10b/12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 28-VQFN Exposed Pad, 28-HVQFN, 28-SQFN, 28-DHVQFN
• Core Frequency: 40MHz
• Core Supply Voltage: 2.75V
• Embedded Interface Type: I2C, JTAG, SPI, UART
• No. Of I/o's: 21
• Flash Memory Size: 12KB
• Supply Voltage Range: 3V To 3.6V
• Package: 28QFN EP
• Device Core: dsPIC
• Family Name: dSPIC33
• Maximum Speed: 40 MHz
• Operating Supply Voltage: 3.3 V
• Data Bus Width: 16 Bit
• Number Of Programmable I/os: 21
• Interface Type: I2C/SPI/UART
• On-chip Adc: 6-chx10-bit|6-chx12-bit
• Number Of Timers: 3
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AC164336 - MODULE SOCKET FOR PM3 28/44QFNDM240001 - BOARD DEMO PIC24/DSPIC33/PIC32
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

4.2.6
The READC command instructs the programming
executive to read N Configuration registers or Device
ID registers, starting from the 24-bit address specified
by Addr_MSB and Addr_LS. This command can only
be used to read 8-bit or 16-bit data.
When this command is used to read Configuration
registers, the upper byte in every data word returned by
the programming executive is 0x00 and the lower byte
contains the Configuration register value.
Expected Response (4 + 3 * (N
for N odd):
0x1100
2 + N
Configuration register or Device ID Register 1
...
Configuration register or Device ID Register N
DS70152H-page 26
15
Opcode
Length
N
Addr_MSB
Addr_LS
Note:
Opcode
Field
12 11
READC COMMAND
Reading unimplemented memory will
cause the programming executive to
reset. Please ensure that only memory
locations present on a particular device
are accessed.
N
0x1
0x3
Number of 8-bit Configuration registers
or Device ID registers to read
(maximum of 256).
MSB of 24-bit source address.
Least Significant 16 bits of 24-bit
source address.
Addr_LS
8 7
Description
Length
–
1)/2 words
Addr_MSB
0
4.2.7
The READP command instructs the programming
executive to read N 24-bit words of code memory,
starting from the 24-bit address specified by Addr_MSB
and Addr_LS. This command can only be used to read
24-bit data. All data returned in the response to this
command uses the packed data format described in
Section 4.2.2 “Packed Data
Expected Response (2 + 3 * N/2 words for N even):
0x1200
2 + 3 * N/2
Least significant program memory word 1
...
Least significant data word N
Expected Response (4 + 3 * (N
for N odd):
0x1200
4 + 3 * (N
Least significant program memory word 1
...
MSB of program memory word N (zero padded)
15
Opcode
Length
N
Reserved
Addr_MSB
Addr_LS
Note:
Opcode
Field
Reserved
–
12 11
READP COMMAND
Reading unimplemented memory will
cause the programming executive to
reset. Please ensure that only memory
locations present on a particular device
are accessed.
1)/2
0x2
0x4
Number of 24-bit instructions to read
(maximum of 32768).
0x0
MSB of 24-bit source address.
Least Significant 16 bits of 24-bit
source address.
Addr_LS
© 2010 Microchip Technology Inc.
8 7
N
Description
Format”.
Length
–
1)/2 words
Addr_MSB
0