DSPIC33FJ12MC202-I/ML Microchip Technology, DSPIC33FJ12MC202-I/ML Datasheet - Page 81

• Manufacturer Part Number: DSPIC33FJ12MC202-I/ML
• Description: IC DSPIC MCU/DSP 12K 28QFN
• Manufacturer: Microchip Technology
• Series: dsPIC™ 33Fr

Specifications of DSPIC33FJ12MC202-I/ML

• Core Processor: dsPIC
• Core Size: 16-Bit
• Speed: 40 MIPs
• Connectivity: I²C, IrDA, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, Motor Control PWM, QEI, POR, PWM, WDT
• Number Of I /o: 21
• Program Memory Size: 12KB (12K x 8)
• Program Memory Type: FLASH
• Ram Size: 1K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 3.6 V
• Data Converters: A/D 6x10b/12b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 28-VQFN Exposed Pad, 28-HVQFN, 28-SQFN, 28-DHVQFN
• Core Frequency: 40MHz
• Core Supply Voltage: 2.75V
• Embedded Interface Type: I2C, JTAG, SPI, UART
• No. Of I/o's: 21
• Flash Memory Size: 12KB
• Supply Voltage Range: 3V To 3.6V
• Package: 28QFN EP
• Device Core: dsPIC
• Family Name: dSPIC33
• Maximum Speed: 40 MHz
• Operating Supply Voltage: 3.3 V
• Data Bus Width: 16 Bit
• Number Of Programmable I/os: 21
• Interface Type: I2C/SPI/UART
• On-chip Adc: 6-chx10-bit|6-chx12-bit
• Number Of Timers: 3
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AC164336 - MODULE SOCKET FOR PM3 28/44QFNDM240001 - BOARD DEMO PIC24/DSPIC33/PIC32
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

Revision G (March 2009) (Continued)
• Removed PROGW and renamed QBLANK to
• Updated the flowchart in
• Updated the second paragraph in
• Changed the CFGB calculation for
• Removed Note 2 in
• Updated the Erased Value and Value with
• Removed COE and BKBUG Configuration Bit
• Added PLLKEN to FWDT in
• Added ALTQIO and ALTSS1 to FPOR in
© 2010 Microchip Technology Inc.
QBLANKEX in the Command Set Summary, and
added the following commands (see
- ERASEB
- ERASEP
- CRCP
“Confirming the Presence of the Programming
Executive”
dsPIC33FJ06GS101/102/202 and
dsPIC33FJ16GS402/404/502/504 devices to:
+ (FPOR & 0x0F)
0xAAAAAA at 0x0 and Last Code Address
columns in Table 3-2 for the following devices:
- dsPIC33FJ64GP202
- dsPIC33FJ64GP204
- dsPIC33FJ64GP802
- dsPIC33FJ64GP804
- dsPIC33FJ64MC202
- dsPIC33FJ64MC204
- dsPIC33FJ64MC802
- dsPIC33FJ64MC804
- PIC24HJ64GP202
- PIC24HJ64GP204
- PIC24HJ64GP502
- PIC24HJ64GP504
Descriptions in
Table 3-3
Table 3-2
and Table 3-3
Table 3-2
Section 3.6.1 “Overview”
Figure 3-2
and Table 3-3
Table 3-2
Section 3.2
Table
and
3-1):
• Removed Notes for the following Configuration Bit
• Added Note 6 and Note 7 to Table 3-3
• Added Note 1 to
• Added Note to the beginning of
• Updated the third paragraph in
• Changed the clock speed to be provided by the
• Added
• Removed FUID2 and FUID3 from
• Added new Default Configuration Register Value
• Updated description for FWDT and added Note 1
• Added seven new op code instructions to Step 3
• Updated Step 4 in
• Added new columns (Application ID and JTAG ID)
• Added JTAG Type registers (see
• The following updates were made to
Descriptions in
- RBS
- RSS (removed Note 1)
- SSS
- SWRP
- IOL1WAY
- ALTI2C
- BOREN
Programming Executive”
“Communication Interface and Protocol”
clarify the clock response time
programmer from 7.35 MHz to 1.85 MHz in
Section 4.1.2 “SPI Rate”
(formerly Figure 5-2)
table in support of dsPIC33FJ32GSX06/60X/610
and dsPIC33FJ64GSX06/60X/610 devices (see
Table
in
in
pointer increment
to
Register 7-2
- Updated parameters P1A and P1B and
- Updated characteristic for parameter P16
- Updated minimum value and units for
- Added new parameter P21
added additional characteristics and values
parameter P18
Table 5-10
Table 6-1
Table 7-1
5-9)
Figure 5-2
and
Table
Figure 3-5
Register
and updated
Table 6-1
3-2:
7-3)
to reflect the TBLPG
Section 4.1.1
Figure 5-3
Section 4.0 “The
Register
DS70152H-page 81
Table 5-6
Table 8-1
7-1,
to