CJ1W-PNT21 Omron, CJ1W-PNT21 Datasheet - Page 22

• Manufacturer Part Number: CJ1W-PNT21
• Description: CJ Profinet Master
• Manufacturer: Omron

Specifications of CJ1W-PNT21

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Basic operating procedure
2-4-2
Preparations for use
The following procedure shows the basic steps required before using the
PROFINET IO Controller and IO Device Units.
Initial setup procedure
1 Mount the CJ1W-PNT21 Unit in the PLC I/O system on the DIN rail.
2 Set the Unit Number of the CJ1W-PNT21 to a unique value.
3 Wire the PROFINET IO network by connecting IO Devices to the
4 Turn ON the power to the PLC and the I/O Devices.
5 Make sure the CJ1W-PNT21 is recognized in the I/O-table of the CJ1-PLC.
Configuration procedure
Use the following procedure to configure the PROFINET IO Controller and
PROFINET IO Devices using CX-ConfiguratorFDT, using the IO Controller
and IO Device DTMs:
1 Turn ON the PLC power supply and the power supplies of the IO Devices
2 Use the PROFINET IO Controller DTM's Network Scan function to assign
3 In CX-ConfiguratorFDT, create a network and define the parameters and
4 Download the network configuration to the PROFINET IO Controller Unit.
5 After restart of the PROFINET IO Controller Unit, communication with the
PROFINET IO Controller Unit.
on the network.
Device Names to the actual IO Devices in the network.
I/O configurations for the PROFINET IO Controller Unit and the allocated
IO Devices. Choose the update rate for each IO Device.
After downloading the configuration, CX-ConfiguratorFDT will restart the
PROFINET IO Controller Unit.
PROFINET IO Devices will start automatically.
Section 2-4
9