CJ1W-PNT21 Omron, CJ1W-PNT21 Datasheet - Page 41

• Manufacturer Part Number: CJ1W-PNT21
• Description: CJ Profinet Master
• Manufacturer: Omron

Specifications of CJ1W-PNT21

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Installation of Configuration Software
3-5
3-5-1
3-5-2
DTM Installation
28
Installation of Configuration Software
Installation requirements
Installation procedure
1,2,3...
In order to operate the PROFINET IO system the PROFINET IO Controller
needs to be configured for communication with the PROFINET IO Devices.
For this purpose OMRON provides the CJ1W-PNT21 DTM via the OMRON
web site http://technicalsupport.europe.omron.com/
After installation the DTM will run in the FDT Container, allowing the user to
set up the I/O configuration and to set the parameters of the CJ1W-PNT 21.
The following are the minimum requirements for a PC to install the CJ1W-
PNT21 DTM configuration software:
•
•
•
•
•
•
This section explains how to install the PROFINET IO Controller DTM
software.
1 Exit all other Windows-based programs.
2 Double-click the file
3 The user is then guided through the installation process.
PC Pentium III or higher, 500 MHz minimum
Operating System: Windows 2000 SP2, Windows XP or Windows Vista
RAM: 256 MB minimum
Hard disk space: 256 MB minimum
Graphics resolution: 1024 x 768 pixels minimum
Installed FDT Container software, i.e. OMRON’s CX-ConfiguratorFDT.
CJ1W-PNT21_PROFINET_IO_Controller_Setup.exe.
The setup program for the CJ1W-PNT21 DTM will start.
Select the preferred Language for the Setup and click OK.
Section 3-5