CJ1W-PNT21 Omron, CJ1W-PNT21 Datasheet - Page 62

• Manufacturer Part Number: CJ1W-PNT21
• Description: CJ Profinet Master
• Manufacturer: Omron

Specifications of CJ1W-PNT21

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

CJ1W-PNT21 PROFINET IO Controller DTM
4-3-3-2 IO Controller Setup
Network Settings Box
Auto-Addressing Box
clicking the Read button will read the current PLC mode. Selecting the
required PLC mode and pressing the Set button will set the PLC to the
required mode.
The IO Controller Setup item contains settings regarding the behaviour of the
PROFINET IO Controller Unit. The IO Controller Setup item is shown below.
The Network Settings Box contains the fields to enter the PROFINET IO-
Controller’s Name, IP Address and Subnet Mask. This information is required
to let the PROFINET IO Controller connect to the PROFINET IO network.
/i
The Auto-Addressing function incluences the I/O Mapping process when
adding and removing I/O modules or when editing an existing I/O Mapping.
Name
IP Address
Subnet Mask
Use Gateway
Item
This string is the PROFINET IO name of the Unit.
This is the IP Address the PROFINET IO Controller Unit will
use to setup communication to PROFINET IO Devices and
on which the PROFINET IO Controller will be accessible from
the Ethernet network. The last number of the IP Address for
the PROFINET IO Controller Unit can not be higher that 126.
This is the Subnet Mask that will be used with the above IP-
Address.
This is currently not supported.
Figure 4.9: IO Controller setup
Description
Section 4-3
49