CJ1W-PNT21 Omron, CJ1W-PNT21 Datasheet - Page 55

• Manufacturer Part Number: CJ1W-PNT21
• Description: CJ Profinet Master
• Manufacturer: Omron

Specifications of CJ1W-PNT21

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

CX-ConfiguratorFDT Main Window
Exporting DTM Information
to HTML
4-2-4
Error Log view
Purpose of the Error log
42
Error Logging and FDT Monitoring
1,2,3...
After exporting the information, the default browser is launched, showing the
result of the export process. The HTML file contains links to open the
information pages for the individual DTMs. The amount of the information
displayed depends on the individual DTMs. The displayed information can
range from only the device type and version information to up to all possible
settings and selections made for the device.
To export single DTM information to HTML execute the following steps:
1 Select the DTM in the Network view.
2 Right click the DTM to bring up the context menu.
3 Select the Export to HTML option from the context menu.
A window will pop up displaying the progress of the export process. When
finished, CX-ConfiguratorFDT will launch the default browser to display the
result. In this case, however, no links will be available to other DTMs in the
network.
CX-ConfiguratorFDT provides two logging windows at the bottom of the
application window. Both windows are used for displaying events.
The Error Log view displays error messages reported by the DTMs and by the
CX-ConfiguratorFDT FDT container application. All messages include the
Time and Date of occurrence as well as the DTM Name, as shown in the
Network view.
The purpose of the Error Log view is error reporting and troubleshooting. The
contents of the window can be copied to the clipboard, for pasting to another
application or into an E-mail. The errors and the sequence in which they occur
may hold additional clues in case of problems.
Error Log Format
The format used in the Error Log view is:
Time: <Time> Date: <Date> - <DTM name> <message>
The message displayed, originates from the DTM in which the error occurred.
The figure below shows an example of an error message sequence. This
example sequence is generated after attempting to change a slave address to
that of another slave already assigned to the same Master Unit
Right-clicking in the Error Log view displays a context menu providing the
options listed below.
/i
Figure 4.4: Error log
Section 4-2