STM32L162QD STMicroelectronics, STM32L162QD Datasheet - Page 76

• Manufacturer Part Number: STM32L162QD
• Description: Ultra-low-power ARM Cortex-M3 MCU with 384 Kbytes Flash, 32 MHz CPU, LCD, USB, 3xOp-amp, AES
• Manufacturer: STMicroelectronics

Specifications of STM32L162QD

• Operating Power Supply Range: 1.65 V to 3.6 V (without BOR) or 1.8 V to 3.6 V
• 7 Modes: Sleep, Low-power run (11 μA at 32 kHz), Low-power sleep (4.4 μA), Stop with RTC, Stop (650 nA), Standby with RTC, Standby (300 nA)
• Ultralow Leakage Per I/o: 50 nA max
• Fast Wakeup Time From Stop: 8 μs
• Core: ARM 32-bit Cortex™-M3 CPU
• Dma: 12-channel DMA controller
• 11 Timers: one 32-bit and six 16-bit general-purpose timers, two 16-bit basic timers, two watchdog timers (independent and window)

Electrical characteristics
6.3.9
76/124
FSMC characteristics
Asynchronous waveforms and timings
Figure 15
Table 37
with the following FSMC configuration:
●
●
●
Figure 15. Asynchronous non-multiplexed SRAM/PSRAM/NOR read waveforms
1. Mode 2/B, C and D only. In Mode 1, FSMC_NADV is not used.
AddressSetupTime = 0
AddressHoldTime = 1
DataSetupTime = 1
provide the corresponding timings. The results shown in these tables are obtained
through
Figure 18
STM32L162VD, STM32L162ZD, STM32L162QD, STM32L162RD
represent asynchronous waveforms and
Doc ID 022268 Rev 2
Table 34
through