z80189 ZiLOG Semiconductor, z80189 Datasheet - Page 118

• Manufacturer Part Number: z80189
• Description: Z80180, Z8s180, Z8l180 Mpu Operation
• Manufacturer: ZiLOG Semiconductor

Bit
Position Bit/Field
2-0
DMA Register Description
Bit 7
This bit must be set to 1 only when both DMA channels are set to take
their requests from the same device. If this bit is 1 (it resets to 0), the
TEND output of DMA channel o sets a flip-flop, so that thereafter the
device’s request is visible to channel 1, but not visible to channel 0. The
internal TEND signal of channel 1 clears the FF, so that thereafter, the
device’s request is visible to channel 0, but no visible to channel 1.
If DMA request are from differing sources, DMA channel 0 request is
forced onto DMA channel 1 after TEND output of DMA channel 0 sets
the flop-flop to alternate.
Bit 6
When both DMA channels are programmed to take their requests from
the same device, this bit (FF mentioned in the previous paragraph)
controls which channel the device’s request is presented to: 0 = DMA0, 1
= DMA l. When Bit 7 is 1, this bit is automatically toggled by the channel
end output of the channels.
R/W
R/W
Value Description
000
001
010
011
111
DMA1 ext TOUT/DREQ
DMA1 ASCI0
DMA1 ASCI1
DMA1 ESCC
DMA1 PIA27-20 (P1284)
Family MPU User Manual
UM005003-0703
Z8018x
103