wm8770 Wolfson Microelectronics plc, wm8770 Datasheet - Page 16

• Manufacturer Part Number: wm8770
• Description: 24-bit, 192khz 8-channel Codec With Volume Control
• Manufacturer: Wolfson Microelectronics plc

WM8770
w
In a real application the designer is unlikely to have control of the relative power up sequence of
AVDD and DVDD. Using the POR circuit to monitor VMIDADC ensures a reasonable delay between
applying power to the device and Device Ready.
Figure 10 and Figure 11 show typical power up scenarios in a real system. Both AVDD and DVDD
must be established and VMIDADC must have reached the threshold Vporr before the device is
ready and can be written to. Any writes to the device before Device Ready will be ignored.
Figure 10 shows DVDD powering up before AVDD. Figure 11 shows AVDD powering up before
DVDD. In both cases, the time from applying power to Device Ready is dominated by the charge
time of VMIDADC.
A 10uF cap is recommended for decoupling on VMIDADC. The charge time for VMIDADC will
dominate the time required for the device to become ready after power is applied. The time required
for VMIDADC to reach the threshold is a function of the VMIDADC resistor string and the decoupling
capacitor. The Resistor string has a typical equivalent resistance of 50kohm (+/-20%). Assuming a
10uF capacitor, the time required for VMIDADC to reach threshold of 1V is approx 110ms.
PD Rev 4.2 March 2008
Production Data
16