s3c2410a Samsung Semiconductor, Inc., s3c2410a Datasheet - Page 406

• Manufacturer Part Number: s3c2410a
• Description: 16/32-bit Risc Arm Microprocessor
• Manufacturer: Samsung Semiconductor, Inc.

LCD CONTROLLER
Example 1:
160 x 160, 4-level gray, 80 frame/sec, 4-bit single scan display, HCLK frequency is 60 MHz WLH = 1, WDLY = 1.
Data transmission rate = 160
CLKVAL = 58,
HOZVAL = 39,
LINEBLANK =10
LCDBASEL = LCDBASEU + 3200
NOTE:
Example 2 (Virtual Screen Register):
4 -level gray, Virtual screen size = 1024
1 halfword = 8 pixels (4-level gray),
Virtual screen 1 line = 128 halfword = 1024 pixels,
LCD 1 line = 320 pixels = 40 halfword,
OFFSIZE = 128 - 40 = 88 = 0 58,
PAGEWIDTH = 40 = 0 28
LCDBASEL = LCDBASEU + (PAGEWIDTH + OFFSIZE)
: If Enable and Disable Video output, [ENVID] of LCDCON1 Register, it is repeated over 100times,
there could be 1Word data loss in case of STN. But the probability of this symptom is very low.
=> Workaround : You should insert the below function in your code right before Enable Video output.
15-40
Known Problem of STN LCD
void Lcd_Workaround (void)
{
remove this line.
}
{
The higher the system load is, the lower the cpu performance is.
}
rLCDCON5|=(1<<3); //Enable LCD_PWREN, If you don't use LCD_PWREN, then you can remove this line.
int loop=7;
rLCDCON5=rLCDCON5&~(1<<3); // Disable LCD_PWREN, If you don't use LCD_PWREN, you can
for(i=0; I<loop; I++)
rLCDCON1|=1; // ENVID=ON
rLCDCON1 =rLCDCON1 & 0x3fffe; // ENVID Off
VCLK = 517 kHz
LINEVAL = 159
160
80
1024, LCD size = 320
1/4 = 512 kHz
(LINEVAL +1) = 100 + (40 + 88)
240, LCDBASEU = 0 64, 4-bit dual scan.
120 = 0
3C64
S3C2410A