S9S12G96F0MLF Freescale Semiconductor, S9S12G96F0MLF Datasheet - Page 177

• Manufacturer Part Number: S9S12G96F0MLF
• Description: 16-bit Microcontrollers - MCU 16BIT 96K FLASH
• Manufacturer: Freescale Semiconductor

Specifications of S9S12G96F0MLF

• Rohs: yes
• Core: S12
• Processor Series: MC9S12G
• Data Bus Width: 16 bit
• Maximum Clock Frequency: 25 MHz
• Program Memory Size: 96 KB
• Data Ram Size: 8192 B
• On-chip Adc: Yes
• Operating Supply Voltage: 3.13 V to 5.5 V
• Operating Temperature Range: - 40 C to + 125 C
• Package / Case: LQFP-48
• Mounting Style: SMD/SMT

2.3.11
Freescale Semiconductor
PJ7
PJ6
PJ5
PJ4
PJ3
PJ2
Pins PJ7-0
• 64/100 LQFP: The SPI2 SS signal is mapped to this pin when used with the SPI function. Depending
• 64/100 LQFP: Pin interrupts can be generated if enabled in input or output mode.
• Signal priority:
• 64/100 LQFP: The SPI2 SCK signal is mapped to this pin when used with the SPI function. Depending
• 64/100 LQFP: Pin interrupts can be generated if enabled in input or output mode.
• Signal priority:
• 64/100 LQFP: The SPI2 MOSI signal is mapped to this pin when used with the SPI function.
• 64/100 LQFP: Pin interrupts can be generated if enabled in input or output mode.
• Signal priority:
• 64/100 LQFP: The SPI2 MISO signal is mapped to this pin when used with the SPI function.Depending
• 64/100 LQFP: Pin interrupts can be generated if enabled in input or output mode.
• Signal priority:
• Except 20 TSSOP and 32 LQFP: The SPI1 SS signal is mapped to this pin when used with the SPI
• 48 LQFP: The PWM channel 7 signal is mapped to this pin when used with the PWM function. The
• Except 20 TSSOP and 32 LQFP: Pin interrupts can be generated if enabled in input or output mode.
• Signal priority:
• Except 20 TSSOP and 32 LQFP: The SPI1 SCK signal is mapped to this pin when used with the SPI
• 48 LQFP: The TIM channel 7 signal is mapped to this pin when used with the TIM function. The TIM
• Except 20 TSSOP and 32 LQFP: Pin interrupts can be generated if enabled in input or output mode.
• Signal priority:
on the configuration of the enabled SPI2 the I/O state is forced to be input or output.
64/100 LQFP: SS2 > GPO
on the configuration of the enabled SPI2 the I/O state is forced to be input or output.
64/100 LQFP: SCK2 > GPO
Depending on the configuration of the enabled SPI2 the I/O state is forced to be input or output.
64/100 LQFP: MOSI2 > GPO
on the configuration of the enabled SPI2 the I/O state is forced to be input or output.
64/100 LQFP: MISO2 > GPO
function. Depending on the configuration of the enabled SPI1 the I/O state is forced to be input or
output.
enabled PWM channel forces the I/O state to be an output.
48 LQFP: SS1 > PWM7 > GPO
64/100 LQFP: SS1 > GPO
function. Depending on the configuration of the enabled SPI1 the I/O state is forced to be input or
output.
forces the I/O state to be an output for a timer port associated with an enabled output.
48 LQFP: SCK1 > IOC7 > GPO
64/100 LQFP: SCK1 > GPO
MC9S12G Family Reference Manual, Rev.1.23
Table 2-15. Port
J
Pins PJ7-0
Port Integration Module (S12GPIMV1)
179