S9S12G96F0MLF Freescale Semiconductor, S9S12G96F0MLF Datasheet - Page 55

• Manufacturer Part Number: S9S12G96F0MLF
• Description: 16-bit Microcontrollers - MCU 16BIT 96K FLASH
• Manufacturer: Freescale Semiconductor

Specifications of S9S12G96F0MLF

• Rohs: yes
• Core: S12
• Processor Series: MC9S12G
• Data Bus Width: 16 bit
• Maximum Clock Frequency: 25 MHz
• Program Memory Size: 96 KB
• Data Ram Size: 8192 B
• On-chip Adc: Yes
• Operating Supply Voltage: 3.13 V to 5.5 V
• Operating Temperature Range: - 40 C to + 125 C
• Package / Case: LQFP-48
• Mounting Style: SMD/SMT

1.7.2.11
PJ[7:0] are general-purpose input or output signals. The signals can be configured on per signal basis as
interrupt inputs with wakeup capability (KWJ[7:0]). They can have a pull-up or pull-down device selected
and enabled on per signal basis. Out of reset the pull devices are enabled .
1.7.2.12
PM[3:0] are general-purpose input or output signals. They can have a pull-up or pull-down device selected
and enabled on per signal basis. Out of reset the pull devices are disabled. The signals can be configured
on per pin basis to open-drain mode.
1.7.2.13
PP[7:0] are general-purpose input or output signals. The signals can be configured on per signal basis as
interrupt inputs with wakeup capability (KWP[7:0]). They can have a pull-up or pull-down device selected
and enabled on per signal basis. Out of reset the pull devices are disabled .
1.7.2.14
PS[7:0] are general-purpose input or output signals. They can have a pull-up or pull-down device selected
and enabled on per signal basis. Out of reset the pull-up devices are enabled. The signals can be configured
on per pin basis in open-drain mode.
1.7.2.15
PT[7:0] are general-purpose input or output signals. They can have a pull-up or pull-down device selected
and enabled on per signal basis. Out of reset the pull devices are disabled .
1.7.2.16
AN[15:0] are the analog inputs of the Analog-to-Digital Converter.
1.7.2.17
1.7.2.17.1
ACMPP is the non-inverting input of the analog comparator.
1.7.2.17.2
ACMPM is the inverting input of the analog comparator.
1.7.2.17.3
ACMPO is the output of the analog comparator.
Freescale Semiconductor
PJ[7:0] / KWJ[7:0] — Port J I/O Signals
PM[3:0] — Port M I/O Signals
PP[7:0] / KWP[7:0] — Port P I/O Signals
PS[7:0] — Port S I/O Signals
PT[7:0] — Port TI/O Signals
AN[15:0] — ADC Input Signals
ACMP Signals
ACMPP — Non-Inverting Analog Comparator Input
ACMPM — Inverting Analog Comparator Input
ACMPO — Analog Comparator Output
MC9S12G Family Reference Manual, Rev.1.23
Device Overview MC9S12G-Family
57