S9S12G96F0MLF Freescale Semiconductor, S9S12G96F0MLF Datasheet - Page 249

• Manufacturer Part Number: S9S12G96F0MLF
• Description: 16-bit Microcontrollers - MCU 16BIT 96K FLASH
• Manufacturer: Freescale Semiconductor

Specifications of S9S12G96F0MLF

• Rohs: yes
• Core: S12
• Processor Series: MC9S12G
• Data Bus Width: 16 bit
• Maximum Clock Frequency: 25 MHz
• Program Memory Size: 96 KB
• Data Ram Size: 8192 B
• On-chip Adc: Yes
• Operating Supply Voltage: 3.13 V to 5.5 V
• Operating Temperature Range: - 40 C to + 125 C
• Package / Case: LQFP-48
• Mounting Style: SMD/SMT

2.5.2.6
If the pin is used as an output this register turns off the active-high drive. This allows wired-or type
connections of outputs.
2.5.2.7
If the pin is used as an interrupt input this register serves as a mask to the interrupt flag to enable/disable
the interrupt.
2.5.2.8
If the pin is used as an interrupt input this register holds the interrupt flag after a valid pin event.
2.5.2.9
This register allows software re-configuration of the pinouts for specific peripherals in the 20 TSSOP
package only.
2.5.2.10
This register determines the package in use. Pre programmed by factory.
2.5.3
The following table summarizes the effect of the various configuration bits, that is data direction (DDR),
output level (IO), pull enable (PE), pull select (PS) on the pin function and pull device
The configuration bit PS is used for two purposes:
1.
Freescale Semiconductor
1. Configure the sensitive interrupt edge (rising or falling), if interrupt is enabled.
2. Select either a pullup or pulldown device if PE is active.
Pin Configuration Summary
Wired-Or Mode Register (WOMx)
Interrupt Enable Register (PIEx)
Interrupt Flag Register (PIFx)
Pin Routing Register (PRRx)
Package Code Register (PKGCR)
MC9S12G Family Reference Manual, Rev.1.23
Port Integration Module (S12GPIMV1)
1
.
251