MPC8349E-MITXE Freescale Semiconductor, MPC8349E-MITXE Datasheet - Page 42

• Manufacturer Part Number: MPC8349E-MITXE
• Description: BOARD REFERENCE FOR MPC8349
• Manufacturer: Freescale Semiconductor
• Series: PowerQUICC II™ PROr
• Type: MPUr

Specifications of MPC8349E-MITXE

• Contents: Module and Misc Hardware
• Processor To Be Evaluated: MPC8349E
• Interface Type: Ethernet, USB
• Silicon Manufacturer: Freescale
• Core Architecture: Power Architecture
• Core Sub-architecture: PowerQUICC
• Silicon Core Number: MPC83xx
• Silicon Family Name: PowerQUICC II PRO
• Rohs Compliant: Yes
• For Use With/related Products: MPC8349E
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: MPC8349E-MITXE

Getting Started
WARNING
Switch the power OFF when installing/removing the DIMM module.
.
Inserting Direction
Key Position
U1 DIMM 184-pin DDR1
Figure 30. Installing the DDR1 DIMM Module
Both error correcting codes (ECC) and non-ECC DIMM modules are supported. The MPC8349E software
reads the module data width field in the SPD EEPROM to determine whether ECC is present and
configures the corresponding registers in the internal DDR controller. DDR1 unbuffered DIMM modules
with fewer than 12 or greater than 14 row addresses are not supported. DIMM modules with fewer than 8
or greater than 11 column addresses are not supported.
Table 26. Supported ROW/COLUMN Address Combinations
Row/Column Addresses
Number
ROW
12–14
COLUMN
8–11
2.3
External Connections
Do not turn on power until all cables have been connected and the serial port has been configured as
described in
Section 2.4, “Serial Port Configuration (PC).”
2.3.1
Cable Connections
Connect the serial port of the -mITXE system and the personal computer using RS-232 cable supplied with
the system. Then connect the AC adaptor as in shown in
Figure
31.
MPC8349E-mITXE Reference Design Platform User’s Guide, Rev. 2
42
Freescale Semiconductor
Preliminary—Subject to Change Without Notice