HS7047KCM01H Renesas Electronics America, HS7047KCM01H Datasheet - Page 107

• Manufacturer Part Number: HS7047KCM01H
• Description: ON CHIP DEBUG EMULATOR
• Manufacturer: Renesas Electronics America
• Series: SuperH®r
• Type: In Circuit Debuggerr

Specifications of HS7047KCM01H

• Contents: Compact Emulator, IDE, Assembler and Linker
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• For Use With/related Products: SH7047
• Lead Free Status / RoHS Status: Not Compliant, Contains lead / RoHS non-compliant

Description:
Table 4.3
Option
[Mode] combo box
[Emulation mode] combo box
[JTAG clock] combo box
[Flash memory synchronization]
combo box
[Port D] combo box
[Driver] group box
[Change...] button
[General] Page Options
Description
Displays the device name.
Selects the execution mode. Select Normal to perform normal
emulation. Select No Break to disable breakpoint settings.
Select Sequential break Condition 2-1, etc. to use the
sequential break function*
1, execution stops when conditions are satisfied in the order of
Break Condition 2 and Break Condition 1.)
Sets the JTAG frequency*
Synchronization method is set between the host computer and
the flash memory.
When synchronization is performed from the host computer to
the flash memory, a waiting time will be generated to write the
flash memory during user program halting, but the displayed
contents and the flash memory are always matched.
When synchronization is performed from the flash memory to
the host computer, the rewritten contents in the user program
mode will be reflected since the flash memory is read during
user program halting.
Disable: Synchronization is not performed except when the
E10A emulator is activated and the flash memory area is
modified.
PC to Flash memory: Synchronization is performed from the
host computer t the flash memory.
Flash memory to PC: Synchronization is performed from the
flash memory to the host computer.
PC to Flash memory, Flash memory to PC: Synchronization is
performed between the host computer and the flash memory.
Sets whether the multiplexed port D is used in the AUD.
AUD not used: Port D is not used in the AUD.
AUD used: Port D is used in the AUD.
Displays the [E10A Driver Details] dialog box. Use when a
driver currently connected is changed.
Displays the driver currently selected.
1
3
. (For Sequential break Condition 2-
.
83