HS7047KCM01H Renesas Electronics America, HS7047KCM01H Datasheet - Page 43

• Manufacturer Part Number: HS7047KCM01H
• Description: ON CHIP DEBUG EMULATOR
• Manufacturer: Renesas Electronics America
• Series: SuperH®r
• Type: In Circuit Debuggerr

Specifications of HS7047KCM01H

• Contents: Compact Emulator, IDE, Assembler and Linker
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• For Use With/related Products: SH7047
• Lead Free Status / RoHS Status: Not Compliant, Contains lead / RoHS non-compliant

2. If the user system interface cable is disconnected to the Hitachi-UDI port
3. If the emulator is not initiated, the following dialog boxes shown in figures 2.13
(a) If the following dialog box is displayed, the power of the user system may not be
(b) If the following dialog box is displayed, check that the Hitachi-UDI port connector
(c) If the following dialog box is displayed, the device may not correctly operate.
connector on the user system during user program execution, the following dialog
box will be displayed.
through 2.17 will be displayed.
input or the RESET signal may not be input to the device. Check the input
circuits for the power of the user system and the reset pin.
on the user system is correctly connected.
Check if there are reasons for illegal device operation.
Figure 2.12 [JTAG Connector Disconnected] Dialog Box
Figure 2.13 [Can not find /RESET signal] Dialog Box
Figure 2.14 [Check the connection] Dialog Box
19