HS7047KCM01H Renesas Electronics America, HS7047KCM01H Datasheet - Page 187

• Manufacturer Part Number: HS7047KCM01H
• Description: ON CHIP DEBUG EMULATOR
• Manufacturer: Renesas Electronics America
• Series: SuperH®r
• Type: In Circuit Debuggerr

Specifications of HS7047KCM01H

• Contents: Compact Emulator, IDE, Assembler and Linker
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• For Use With/related Products: SH7047
• Lead Free Status / RoHS Status: Not Compliant, Contains lead / RoHS non-compliant

(2) Realtime Memory Access Function
Realtime memory reading or writing is enabled during user program execution. The specified
memory address contents (maximum three) can be displayed on the status bar. The memory
contents can be changed by the command line, and can be referenced in the [Memory] window.
Memory can be read or written as follows:
1. When the [Memory] window is used:
2. When the command line is used:
Note: Note that the flash memory area cannot be written by the RAM_W command.
(3) Products Using the AUD Function and Note
Table 6.8
Type Name
HS7047KCM01H
HS7047KCM02H
HS7047KCI01H
HS7047KCI02H
Notes: 1. To use the AUD function, set the system clock to 40 MHz or lower.
Memory can be read or written during user program execution. Open the address to be
referenced in the [Memory] window. At reference, select Refresh from the [Memory] menu or
issue the Refresh command in the command-line window.
MEMORY_EDIT command: Memory can be read or written during user program execution.
RAM_R command: Address and size displayed on the status bar are specified during user
program execution.
RAM_W command: Memory can be changed during user program execution. One command
can change a maximum of three addresses.
2. Trace cannot be acquired while memory read/write is being performed by using the
RAM monitor function during user program execution.
Type Name and AUD Function
AUD Function
Not available
Available
Not available
Available
163