HS7047KCM01H Renesas Electronics America, HS7047KCM01H Datasheet - Page 32

• Manufacturer Part Number: HS7047KCM01H
• Description: ON CHIP DEBUG EMULATOR
• Manufacturer: Renesas Electronics America
• Series: SuperH®r
• Type: In Circuit Debuggerr

Specifications of HS7047KCM01H

• Contents: Compact Emulator, IDE, Assembler and Linker
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• For Use With/related Products: SH7047
• Lead Free Status / RoHS Status: Not Compliant, Contains lead / RoHS non-compliant

2.2
When the CD-R is inserted in the host computer’s CD-ROM drive, the HDI installation wizard is
automatically activated (holding the Shift key down while the CD-R is inserted cancels this
automatic activation). To run the installation wizard when it has not been automatically activated,
execute Setup.exe from the root directory of the CD-R.
Follow the cues given by the installation wizard to install the HDI.
Since hardware settings are also made during installation, the installation procedure differs
according to the operating system or interface (PCI or PCMCIA) being used. Follow the
installation steps carefully according to the environment you are using.
2.2.1
(1) When the emulator is a PCI card:
(2) When the emulator is a PCMCIA card:
Note: When [Add New Hardware Wizard] is displayed, select the [Search for the best driver for
8
1. Install the HDI (when the component type has to be selected during installation, be sure to
2. Shut the operating system down and turn off the power to the host computer.
3. Insert the PCI-card emulator in a slot on the host computer. Refer to section 2.3,
4. Restart the host computer. The hardware is now recognized and the driver is automatically
1. Install the HDI (when the component type has to be selected during installation, be sure to
2. Insert the PCMCIA-card emulator in the host computer’s slot. Refer to section 2.3,
3. The hardware is now recognized and the driver is automatically installed.*
select [PCI Card Driver]).
Connecting the Card Emulator to the Host Computer.
installed.*
select [PC Card Driver (PCMCIA)]).
Connecting the Card Emulator to the Host Computer.
your device. (Recommended)] radio button and then the [Specify a location] check box to
select the path to be searched for drivers. The location must be specified according to the
emulator type, as indicated below:
When using the PCI-card emulator: <Drive>:\DRIVERS\PCI\95
When using the PCMCIA-card emulator: <Drive>:\DRIVERS\PCMCIA\95
(<Drive> is the CD-ROM drive name.)
HDI Installation
Installing under Windows
®
98 and Windows
®
ME Operating Systems