HS7047KCM01H Renesas Electronics America, HS7047KCM01H Datasheet - Page 94

• Manufacturer Part Number: HS7047KCM01H
• Description: ON CHIP DEBUG EMULATOR
• Manufacturer: Renesas Electronics America
• Series: SuperH®r
• Type: In Circuit Debuggerr

Specifications of HS7047KCM01H

• Contents: Compact Emulator, IDE, Assembler and Linker
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• For Use With/related Products: SH7047
• Lead Free Status / RoHS Status: Not Compliant, Contains lead / RoHS non-compliant

3.18
AUD Trace Function
This is the large-capacity trace function that is enabled when the AUD pin is connected to the
emulator. This function displays the branch destination addresses, mnemonics, operands, and
source lines.
When the branch destination instructions are one branch, the number of branch instructions
acquired by a trace is a maximum of 16,383 in the PCMCIA-type emulator and a maximum of
65,535 in the PCI-type emulator.
Table 3.4 shows the AUD trace function.
Notes: 1. The AUD trace function is not supported for all products. For the specifications of
Table 3.4
Type
Acquisition
mode when
the trace
buffer of the
emulator
becomes full
70
2.
3.
Trace Functions
each product, refer to the section related to the trace functions in section 6, SHxxxx
E10A Emulator Specifications, or to the online help.
The AUD trace function is extended for some products. For the specifications of each
product or the number of acquired branches, refer to the section related to the trace
functions in section 6, SHxxxx E10A Emulator Specifications, or to the online help.
In some products, the AUD pin may be invalid. In such case, set the AUD pin to
make it valid before using the AUD trace function.
AUD Trace Functions
Mode
Trace continue
Trace stop
Description
This function always overwrites the oldest trace information to
acquire the latest trace information.
The trace information is not acquired. The user program is
continuously executed.