HS7047KCM01H Renesas Electronics America, HS7047KCM01H Datasheet - Page 41

• Manufacturer Part Number: HS7047KCM01H
• Description: ON CHIP DEBUG EMULATOR
• Manufacturer: Renesas Electronics America
• Series: SuperH®r
• Type: In Circuit Debuggerr

Specifications of HS7047KCM01H

• Contents: Compact Emulator, IDE, Assembler and Linker
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• For Use With/related Products: SH7047
• Lead Free Status / RoHS Status: Not Compliant, Contains lead / RoHS non-compliant

6. The [E10A Driver Details] dialog box is displayed. With the [Driver] combo box, select the
driver to connect the HDI with the emulator. [Interface] displays the interface name of the PC
interface board to be connected, and [Channel] displays the interface to which the board is
connected. Once the driver is selected in the [E10A Driver Details] dialog box, this dialog box
is not displayed when the HDI is run next time. (This procedure will not be executed by target
devices.)
With the [Driver] combo box, select the driver to connect the HDI with the emulator.
[Interface] displays the interface name of the card emulator to be connected, and [Channel]
displays the interface to which the board is connected.
[Driver] combo box: Select [E10A PC Card Driver] to use the PCMCIA card emulator.
[Interface] combo box: Select [PC Card] to use the PCMCIA card emulator.
Click the [Close] button.
Figure 2.8 [E10A Driver Details] Dialog Box
Select [E10A PCI Card Driver] to use the PCI card emulator. For
details, refer to table 6.3 in section 6.5.1, Emulator Driver Selection.
[PCI] is displayed to use the PCI card emulator. (If the driver is
not installed, the [PC Card] or [PCI] is not displayed.)
17