HS7047KCM01H Renesas Electronics America, HS7047KCM01H Datasheet - Page 173

• Manufacturer Part Number: HS7047KCM01H
• Description: ON CHIP DEBUG EMULATOR
• Manufacturer: Renesas Electronics America
• Series: SuperH®r
• Type: In Circuit Debuggerr

Specifications of HS7047KCM01H

• Contents: Compact Emulator, IDE, Assembler and Linker
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• For Use With/related Products: SH7047
• Lead Free Status / RoHS Status: Not Compliant, Contains lead / RoHS non-compliant

User interface connector
(36 pins)
2. The /RESET signal in the user side is input to the 87 pin of the SH7047F. Connect
3. The CK pin is used by the emulator. When the CK pin is directly connected to
Figure 6.3 Circuit between User Interface Connector (36 Pins) and SH7047F
this pin to the Hitachi-UDI port connector as the output from the user system.
the interface, operation may be affected by the load capacity and reflection of the
interface cable. When the emulator is used, it is recommended that the CK pin
between the user interface connector (36 pins) and the SH7047F is connected via
the buffer (e.g., 74LVC125) as shown in figure 6.3. The buffer voltage should be
Vcc.
Pin 29
Buffer
CK pin
SH7047F
149