DF2505FC26V Renesas Electronics America, DF2505FC26V Datasheet - Page 629

• Manufacturer Part Number: DF2505FC26V
• Description: IC H8S/2505 MCU FLASH 144QFP
• Manufacturer: Renesas Electronics America
• Series: H8® H8S/2500r

Specifications of DF2505FC26V

• Core Processor: H8S/2000
• Core Size: 16-Bit
• Speed: 26MHz
• Connectivity: I²C, SCI
• Peripherals: POR, PWM, WDT
• Number Of I /o: 104
• Program Memory Size: 384KB (384K x 8)
• Program Memory Type: FLASH
• Ram Size: 32K x 8
• Voltage - Supply (vcc/vdd): 3 V ~ 5.5 V
• Data Converters: A/D 16x10b; D/A 2x8b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 144-QFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

Bit
3
2
TTME
Bit Name
UE
Initial
Value
0
0
R/W
R/W
R/W
Timing Error
Description
Underrun Error
Indicates that an underrun error has occurred during data
transmission. The IEB detects an underrun error
occurrence when the IEB fetches data from IETBR while
the TxRDY flag is set to 1, and the IEB sets the TxE flag
and enters the wait state. Accordingly, when the TxRDY
flag is not cleared even if data is written to IETBR, an
underrun error occurs and data transmission is
terminated. Note that the TxRDY flag must be cleared in
data transmission by the CPU.
[Setting condition]
•
[Clearing condition]
•
Set to 1 if data is not transmitted at the timing specified by
the IEBus protocol during data transmission. The IEB sets
the TxE flag and enters the wait state.
[Setting condition]
•
[Clearing condition]
•
When a timing error occurs during data transmission
When writing 0 after reading TTME = 1
When the IEB loads data from IETBR to the transmit
shift register while the TxRDY flag is set to 1
When writing 0 after reading UE = 1
Section 17 IEBus™ Controller (IEB) [H8S/2552 Group]
Rev. 6.00 Sep. 24, 2009 Page 581 of 928
REJ09B0099-0600