UPD70F3736GK-GAK-AX Renesas Electronics America, UPD70F3736GK-GAK-AX Datasheet - Page 292

• Manufacturer Part Number: UPD70F3736GK-GAK-AX
• Description: MCU 32BIT V850ES/JX3-L 80-LQFP
• Manufacturer: Renesas Electronics America
• Series: V850ES/Jx3-Lr

Specifications of UPD70F3736GK-GAK-AX

• Package / Case: *
• Voltage - Supply (vcc/vdd): 2.2 V ~ 3.6 V
• Operating Temperature: -40°C ~ 85°C
• Speed: 20MHz
• Number Of I /o: 66
• Core Processor: RISC
• Program Memory Type: FLASH
• Ram Size: 16K x 8
• Program Memory Size: 256KB (256K x 8)
• Data Converters: A/D 8x10b, D/A 1x8b
• Oscillator Type: Internal
• Peripherals: DMA, LVD, PWM, WDT
• Connectivity: CSI, EBI/EMI, I²C, UART/USART
• Core Size: 32-Bit
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -

292
Table 8-4. Function of Capture/Compare Register in Each Mode and How to Write Compare Register
Interval timer
External event counter
External trigger pulse output
One-shot pulse output
PWM output
Free-running timer
Pulse width measurement
(a) Function as compare register
(b) Function as capture register
The following table shows the functions of the capture/compare register in each mode, and how to write data to
the compare register.
The TQ0CCR2 register can be rewritten even when the TQ0CTL0.TQ0CE bit = 1.
The set value of the TQ0CCR2 register is transferred to the CCR2 buffer register. When the value of the
16-bit counter matches the value of the CCR2 buffer register, a compare match interrupt request signal
(INTTQ0CC2) is generated. If TOQ02 pin output is enabled at this time, the output of the TOQ02 pin is
inverted.
When the TQ0CCR2 register is used as a capture register in the free-running timer mode, the count value
of the 16-bit counter is stored in the TQ0CCR2 register if the valid edge of the capture trigger input pin
(TIQ02 pin) is detected. In the pulse-width measurement mode, the count value of the 16-bit counter is
stored in the TQ0CCR2 register and the 16-bit counter is cleared (0000H) if the valid edge of the capture
trigger input pin (TIQ02 pin) is detected.
Even if the capture operation and reading the TQ0CCR2 register conflict, the correct value of the
TQ0CCR2 register can be read.
Operation Mode
CHAPTER 8 16-BIT TIMER/EVENT COUNTER Q (TMQ)
Preliminary User’s Manual U18952EJ1V0UD
Compare register
Compare register
Compare register
Compare register
Compare register
Capture/compare register
Capture register
Capture/Compare Register
Anytime write
Anytime write
Batch write
Anytime write
Batch write
Anytime write
How to Write Compare Register
−