HD64F7047F50 Renesas Electronics America, HD64F7047F50 Datasheet - Page 51

• Manufacturer Part Number: HD64F7047F50
• Description: IC SUPERH MCU FLASH 256K 100QFP
• Manufacturer: Renesas Electronics America
• Series: SuperH® SH7047r

Specifications of HD64F7047F50

• Core Processor: SH-2
• Core Size: 32-Bit
• Speed: 50MHz
• Connectivity: CAN, SCI
• Peripherals: POR, PWM, WDT
• Number Of I /o: 53
• Program Memory Size: 256KB (256K x 8)
• Program Memory Type: FLASH
• Ram Size: 12K x 8
• Voltage - Supply (vcc/vdd): 4.5 V ~ 5.5 V
• Data Converters: A/D 16x10b
• Oscillator Type: Internal
• Operating Temperature: -20°C ~ 75°C
• Package / Case: 100-QFP
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Eeprom Size: -

Type
HCAN2
Motor
management
timer
(MMT)
Output
control for
MTU and
MMT
A/D
converter
Symbol
HTxD1
HRxD1
PUOA
PUOB
PVOA
PVOB
PWOA
PWOB
PCIO
POE6 to
POE0
AN15 to AN0 Input
ADTRG
AVCC
AVSS
Output
Output
Output
Output
Input
I/O
Output
Input
Output
Output
Input/
Output
Input
Input
Input
Name
Transmitted
data
Received data The CAN bus reception pin
U-phase of
PWM
U-phase of
PWM
V-phase of
PWM
V-phase of
PWM
W-phase of
PWM
W-phase of
PWM
PWM control
Port output
control
Analog input
pins
Input of trigger
for A/D
conversion
Analog power
supply
Analog ground The ground pin for the A/D converter.
Function
The CAN bus transmission pin
U-phase output pin for 6-phase non-
overlap PWM waveforms.
U-phase output pin for 6-phase non-
overlap PWM waveforms.
V-phase output pin for 6-phase non-
overlap PWM waveforms.
V-phase output pin for 6-phase non-
overlap PWM waveforms.
W-phase output pin for 6-phase non-
overlap PWM waveforms.
W-phase output pin for 6-phase non-
overlap PWM waveforms.
Counter clear input pin by external input
or output pin for toggle synchronized with
PWM period.
Input pins for the signal to request the
output pins of MTU or MMT to become
high impedance state.
Analog input pins.
Pin for input of an external trigger to start
A/D conversion
Power supply pin for the A/D converter.
When the A/D converter is not used,
connect this pin to the system power
supply (+5 V). Connect all AVCC pins to
the power supply. The chip does not
operate normally when some of these pins
are open.
Connect this pin to the system power
supply (0 V). Connect all AVSS pins to the
system power supply The chip does not
operate normally when some of these pins
are open.
Rev. 2.00, 09/04, page 9 of 720