TDA5250 Infineon Technologies, TDA5250 Datasheet - Page 53

• Manufacturer Part Number: TDA5250
• Description: TX/RX ASK/FSK 868-870MHZ 38TSSOP
• Manufacturer: Infineon Technologies
• Type: Transceiverr

Specifications of TDA5250

• Package / Case: 38-TSSOP
• Frequency: 868MHz
• Data Rate - Maximum: 64kbps
• Modulation Or Protocol: ASK, FSK
• Applications: RKE, Remote Control Systems
• Power - Output: 9dBm
• Sensitivity: -109dBm
• Voltage - Supply: 2.1 V ~ 5.5 V
• Current - Receiving: 9mA
• Current - Transmitting: 12mA
• Data Interface: PCB, Surface Mount
• Antenna Connector: PCB, Surface Mount
• Operating Temperature: -40°C ~ 85°C
• Operating Frequency: 870 MHz
• Operating Supply Voltage: 2.5 V, 3.3 V, 5 V
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Mounting Style: SMD/SMT
• Operating Temperature (min): -40C
• Operating Temperature (max): 85C
• Operating Temperature Classification: Industrial
• Product Depth (mm): 4.4mm
• Product Length (mm): 9.7mm
• Operating Supply Voltage (min): 2.1V
• Operating Supply Voltage (max): 5.5V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Memory Size: -
• Lead Free Status / Rohs Status: Compliant
• Other names: SP000012956; TDA5250; TDA5250INTR; TDA5250XT; TDA5250XT

With C
Alternatively, an external AC coupled (10nF in series to 1k
The drive level should be approximately 100mVpp.
3.2.1
Generating ASK and FSK modulation 3 setable frequencies are necessary.
3.2.1.1
The resulting possible crystal oscillator frequencies are shown in the following Figure 3-16
Figure 3-16
In ASK receive mode the crystal oscillator is set to frequency f
offset to receive the ASK signal at f
To set the 3 different frequencies 3 different C
capacitors can be combined to generate the necessary C
Internal banks of switchable capacitors allow the finetuning of these frequencies.
3.2.2
Depending on whether the device operates in transmit or receive mode or whether it operates in
ASK or FSK the following cases can be distinguished:
3.2.2.1
In transmit mode the two frequencies representing logical HIGH and LOW data states have to be
adjusted depending on the intended frequency deviation and separately according to the following
formulas:
Data Sheet
L+
and C
Synthesizer Frequency setting
Possible crystal oscillator frequencies
Transmit/Receive ASK/FSK Frequency Assignment
FSK-mode
L-
possible crystal oscillator frequencies
the necessary C
∆ f:
RX:
TX:
peak frequency deviation
FSK-
f
1
v+
Deviation
0
*N (N: division ratio of the PLL).
for FSK HIGH and C
Frequency
Nominal
FSK
ASK
f
0
Deviation
53
v
are necessary. Via internal switches 3 external
ASK
FSK+
f
2
Ω
v-
) signal can be applied at pin 19 (Xout).
v
for FSK LOW can be calculated.
in case of ASK- or FSK-modulation.
2
to realize the necessary frequency
TDA5250 D2
Version 1.7
Application
2007-02-26
free_reg.wmf