TDA5250 Infineon Technologies, TDA5250 Datasheet - Page 60

• Manufacturer Part Number: TDA5250
• Description: TX/RX ASK/FSK 868-870MHZ 38TSSOP
• Manufacturer: Infineon Technologies
• Type: Transceiverr

Specifications of TDA5250

• Package / Case: 38-TSSOP
• Frequency: 868MHz
• Data Rate - Maximum: 64kbps
• Modulation Or Protocol: ASK, FSK
• Applications: RKE, Remote Control Systems
• Power - Output: 9dBm
• Sensitivity: -109dBm
• Voltage - Supply: 2.1 V ~ 5.5 V
• Current - Receiving: 9mA
• Current - Transmitting: 12mA
• Data Interface: PCB, Surface Mount
• Antenna Connector: PCB, Surface Mount
• Operating Temperature: -40°C ~ 85°C
• Operating Frequency: 870 MHz
• Operating Supply Voltage: 2.5 V, 3.3 V, 5 V
• Maximum Operating Temperature: + 85 C
• Minimum Operating Temperature: - 40 C
• Mounting Style: SMD/SMT
• Operating Temperature (min): -40C
• Operating Temperature (max): 85C
• Operating Temperature Classification: Industrial
• Product Depth (mm): 4.4mm
• Product Length (mm): 9.7mm
• Operating Supply Voltage (min): 2.1V
• Operating Supply Voltage (max): 5.5V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Memory Size: -
• Lead Free Status / Rohs Status: Compliant
• Other names: SP000012956; TDA5250; TDA5250INTR; TDA5250XT; TDA5250XT

Concerning the frequency tolerances of the whole system also crystal tolerances (tuning
tolerances, temperature stability, tolerance of C L ) have to be considered.
In addition to the chip tolerances also the crystal and external component tolerances have to be
considered in the tuning and non-tuning case.
In case of internal tuning: The crystal on the evaluation board has a temperature stability of +/-
20ppm (or +/- 17kHz), which must be added to the total tolerances.
In case of default setup (without internal tuning and without usage of pin 21) the temperature
stability and tuning tolerance of the crystal as well as the tolerance of the external capacitors (+/-
0.1pF) have to be added. The crystal on the evaluation board has a temperature stability of +/-
20ppm (or +/- 17kHz) and a tuning tolerance of +/- 10ppm (or +/- 8.5 kHz).The external capacitors
add a tolerance of +/- 4ppm (or +/- 3.5kHz).
The frequency stabilities of both the receiver and the transmitter and the modulation bandwidth set
the limit for the bandwidth of the IQ filter. To achieve a high receiver sensitivity and efficient
suppression of adjacent interference signals, the narrowest possible IQ bandwidth should be
realized (see Section 3.3).
3.3
The IQ-Filter should be set to values corresponding to the RF-bandwidth of the received RF signal
via the D1 to D3 bits of the LPF register (subaddress 03H).
Table 3-9
Data Sheet
D3
0
0
0
0
1
1
1
1
IQ-Filter
D2
0
0
1
1
0
0
1
1
3dB cutoff frequencies I/Q Filter
D1
0
1
0
1
0
1
0
1
nominal f
(programmable)
150 (default)
not used
not used
350
250
200
100
60
50
-3dB
in kHz
resulting effective
bandwidth in kHz
channel
700
500
400
300
200
100
TDA5250 D2
Version 1.7
Application
2007-02-26