EM260-RTY Ember, EM260-RTY Datasheet - Page 33

• Manufacturer Part Number: EM260-RTY
• Description: IC ZIGBEE SYSTEM-ON-CHIP 40-QFN
• Manufacturer: Ember

Specifications of EM260-RTY

• Frequency: 2.4GHz
• Data Rate - Maximum: 250kbps
• Modulation Or Protocol: 802.15.4
• Applications: ZigBee™
• Power - Output: -32dBm ~ 3dBm
• Sensitivity: -97dBm
• Voltage - Supply: 2.1 V ~ 3.6 V
• Current - Receiving: 30mA
• Current - Transmitting: 34mA
• Data Interface: PCB, Surface Mount
• Antenna Connector: PCB, Surface Mount
• Operating Temperature: -40°C ~ 85°C
• Package / Case: 40-QFN
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Memory Size: -
• Other names: 636-1003

11. Receive response 0x81 (a byte other than 0xFF), then receive the Frame Terminator, 0xA7.
12. Bit 7 is always set and bit 6 is always cleared in the Version Response, so this is Version 1.
13. Deactivate Slave Select.
14. Host begins timing the inter-command spacing of 1ms in preparation for sending the next command.
15. nHOST_INT asserts shortly after deactivating Slave Select, indicating a callback.
16. Host sees nHOST_INT, but waits for the 1ms before responding.
17. Activate Slave Select.
18. Transmit the command:
19. Wait for nHOST_INT to assert.
20. Transmit and receive 0xFF until a byte other than 0xFF is received.
21. Receive response 0xFE (a byte other than 0xFF), read the next byte for a length.
22. Stop transmitting after the number of bytes (length) is received plus the Frame Terminator.
23. Decode the response:
24. Deactivate Slave Select.
25. Since nHOST_INT does not assert again, there is no more data for the Host.
0xFE
0x02
0x00
0x06
0xA7
0xFE
0x03
0x80
0x19
0x91
0xA7
SPI Byte indicating an EZSP Frame
Length Byte showing the EZSP Frame is 3 bytes long
EZSP Frame Control Byte indicating a response with no overflow
EZSP Frame Type Byte indicating the emberStackStatusHandler response
EmberStatus EMBER_NETWORK_DOWN from emberStackStatusHandler
Frame Terminator
SPI Byte indicating an EZSP Frame
Length Byte showing the EZSP Frame is 2 bytes long
EZSP Frame Control Byte indicating a command with no sleeping
EZSP Frame Type Byte indicating the
Frame Terminator
callback
command
120-1003-000D
EM260
33