E8MS-N0 Omron, E8MS-N0 Datasheet - Page 15

• Manufacturer Part Number: E8MS-N0
• Description: SENSOR PRESSURE NEGATIV 0-101KPA
• Manufacturer: Omron
• Series: E8MSr

Specifications of E8MS-N0

• Pressure Type: Gauge
• Operating Pressure: -14.65 ~ +0 PSI, -101 ~ 0 kPa
• Port Size: Male, 1/8" (3.175mm) 27 NPT
• Output: Digital
• Voltage - Supply: 12 V ~ 24 V
• Termination Style: Cable
• Operating Temperature: 0°C ~ 50°C
• Package / Case: Module
• Sensor Output: Voltage
• Supply Current: 25mA
• Voltage Rating: 12V
• Port Style: NPT, M5
• Pressure Measurement Type: Gage
• Operating Pressure Min: 0psi
• Terminal Type: Connector
• Operating Pressure Max: 14.6psi
• Mounting Style: Desktop
• Maximum Operating Temperature: + 50 C
• Minimum Operating Temperature: 0 C
• Operating Supply Voltage: 12 V
• Output Voltage: 1 V to 5 V
• Pressure Port: Y
• Sensor Type: Sensors
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: E8MSN0

J OUTPUT TYPE SELECTION (NORMALLY OPEN OR NORMALLY CLOSED)
Take the following steps to select the output type (normally open or normally closed output) of the K3C.
Press the MENU Key three times in measurement mode.
“OPE” will appear for output type selection.
The output type presently set will appear by pressing the DISPLAY Key.
NO (normally open) or NC (normally closed) is selected by pressing the Up or Down Key.
By pressing the MENU Key, “SEN” will appear for Sensor type selection after the output type is entered.
If the RST/ESC Key is pressed instead, the set values will not be entered and “OPE” will appear again for output type selection.
When the OUT1 settings are finished and the DISPLAY Key is pressed, OUT2 will be ready for setting only with the channel that has
OUT2 output.
E8M/E8MS
Hysteresis Mode
NO output
NC output
Channels 2 to 4
Channel 1
OFF point
ON point
Cancel
Select NO or NC with
the Up or Down Key.
Select NO or NC with
the Up or Down Key.
Cancel
Enter
Select NO or NC with
the Up or Down Key.
16
Enter
Window Mode
NO output
NC output
OFF point
ON point
OFF point - - - Hysteresis
ON point - - - Hysteresis
E8M/E8MS