E8MS-N0 Omron, E8MS-N0 Datasheet - Page 30

• Manufacturer Part Number: E8MS-N0
• Description: SENSOR PRESSURE NEGATIV 0-101KPA
• Manufacturer: Omron
• Series: E8MSr

Specifications of E8MS-N0

• Pressure Type: Gauge
• Operating Pressure: -14.65 ~ +0 PSI, -101 ~ 0 kPa
• Port Size: Male, 1/8" (3.175mm) 27 NPT
• Output: Digital
• Voltage - Supply: 12 V ~ 24 V
• Termination Style: Cable
• Operating Temperature: 0°C ~ 50°C
• Package / Case: Module
• Sensor Output: Voltage
• Supply Current: 25mA
• Voltage Rating: 12V
• Port Style: NPT, M5
• Pressure Measurement Type: Gage
• Operating Pressure Min: 0psi
• Terminal Type: Connector
• Operating Pressure Max: 14.6psi
• Mounting Style: Desktop
• Maximum Operating Temperature: + 50 C
• Minimum Operating Temperature: 0 C
• Operating Supply Voltage: 12 V
• Output Voltage: 1 V to 5 V
• Pressure Port: Y
• Sensor Type: Sensors
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: E8MSN0

E8MS-jj/E8M-10
The pressure-introducing section (aluminum for E8MS, SUS304
for E8M) is fixed with tapered 1/8 NPT male screws and M5
female screws.
When using tapered screws, use tapered 1/8 NPT female
screws. Wrap the tapered 1/8 NPT male screws with sealing tape
to prevent any leakage. Tighten the male screws to a torque no
more than 3.9 N S m (2.88 ft S lbs).
Tighten M5 female screws to a torque no more than 1 to 1.5
N S m (0.74 to 1.11 ft S lbs).
When tightening a screw, hold by its hexagonal head, not by its
body.
E8M-N0
The pressure-introducing section (SUS304) is fixed with M5 male
screws.
Tighten male screws to a torque no more than 1 to 1.5 N S m
(0.74 to 1.11 ft S lbs).
When tightening a male screw, hold by its hexagonal head, not
by its body.
E8M-A1
The pressure-introducing section (SUS303) is fixed with M5
female screws (7 mm deep).
Tighten screws for the pressure-introducing section to a torque
no more than 1 to 1.5 N S m (0.74 to 1.11 ft S lbs).
M4 female screws are used for the product mounting sections.
When mounting the product, tighten the screws while holding a
metal part of the product, not a resin part.
Tighten the product mounting screws to a torque no more than
1.2 N S m (0.89 ft S lbs).
If the positive pressure section is released and positive pressure
is applied to the negative pressure section, a positive pressure
may be displayed.
E8M/E8MS
Cat. No. CEDSAX4
1-800-55-OMRON
OMRON ELECTRONICS LLC
One East Commerce Drive
Schaumburg, IL 60173
NOTE: DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters to inches divide by 25.4.
R
11/01
OMRON ON- -LINE
Global -- http://www.omron.com
USA -- http://www.omron.com/oei
Canada -- http://www.omron.com/oci
Specifications subject to change without notice.
All Models
Do not use the Sensor in an environment subject to corrosive or
combustible gases.
Be sure to use the Sensor in an environment where air-borne
water or oil is removed by air filters.
Do not use the Sensor alongside a high-tension voltage line or
power line.
Do not expose the Sensor to water.
Mount the Sensor so that ultrasonic vibrations will not be applied
directly to the Sensor.
Be sure to use the Sensor under the rated pressure.
Do not insert any wire into the pressure sections. Doing so may
damage the pressure elements and cause a malfunction.
Do not apply any tensile strength in excess of 20N (4.5 lbs) for
E8MS, 30N (6.75 lbs) for E8M to the cables or connectors.
Do not pull the cables. When removing the connectors for
external connection, be sure to use the lock lever.
K3C
Install the Sensor horizontally.
The recommended panel thickness is 1 to 5 mm (0.04 to 0.20 in).
Do not install the Sensor in an environment subject to strong
vibration or shock.
Do not install the Sensor under dusty conditions.
Do not install the Sensor in an environment subject to corrosive
gases, particularly sulfide and ammonia gases.
Do not install the Sensor near equipment that generates strong
high-frequency noise such as high-frequency welders or sewing
machines.
OMRON CANADA, INC.
416-286-6465
885 Milner Avenue
Scarborough, Ontario M1B 5V8
Printed in U.S.A.
E8M/E8MS