PIC16F1937-E/MV Microchip Technology, PIC16F1937-E/MV Datasheet - Page 290

• Manufacturer Part Number: PIC16F1937-E/MV
• Description: 14KB Flash, 512B RAM, 256B EEPROM, LCD, 1.8-5.5V 40 UQFN 5x5x0.5mm TUBE
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 16Fr

Specifications of PIC16F1937-E/MV

• Processor Series: PIC16F
• Core: PIC
• Program Memory Type: Flash
• Program Memory Size: 14 KB
• Data Ram Size: 256 B
• Interface Type: MI2C, SPI, EUSART
• Number Of Timers: 5
• Operating Supply Voltage: 1.8 V to 5.5 V
• Maximum Operating Temperature: + 125 C
• Mounting Style: SMD/SMT
• Package / Case: UQFN-40
• Development Tools By Supplier: MPLAB IDE Software
• Minimum Operating Temperature: - 40 C
• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 32MHz
• Connectivity: I²C, LIN, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, LCD, POR, PWM, WDT
• Number Of I /o: 36
• Eeprom Size: 256 x 8
• Ram Size: 512 x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 5.5 V
• Data Converters: A/D 14x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Lead Free Status / Rohs Status: Details

PIC16(L)F1934/6/7
REGISTER 24-5:
REGISTER 24-6:
DS41364E-page 290
bit 7
Legend:
R = Readable bit
u = Bit is unchanged
‘1’ = Bit is set
bit 7-1
bit 0
bit 7
Legend:
R = Readable bit
u = Bit is unchanged
‘1’ = Bit is set
Master mode:
bit 7-0
10-Bit Slave mode — Most Significant Address byte:
bit 7-3
bit 2-1
bit 0
10-Bit Slave mode — Least Significant Address byte:
bit 7-0
7-Bit Slave mode:
bit 7-1
bit 0
R/W-1/1
R/W-0/0
ADD<7:0>: Baud Rate Clock Divider bits
SCL pin clock period = ((ADD<7:0> + 1) *4)/F
Not used: Unused for Most Significant Address byte. Bit state of this register is a “don’t care”. Bit pat-
tern sent by master is fixed by I
compared by hardware and are not affected by the value in this register.
ADD<2:1>: Two Most Significant bits of 10-bit address
Not used: Unused in this mode. Bit state is a “don’t care”.
ADD<7:0>: Eight Least Significant bits of 10-bit address
ADD<7:1>: 7-bit address
Not used: Unused in this mode. Bit state is a “don’t care”.
MSK<7:1>: Mask bits
1 = The received address bit n is compared to SSPADD<n> to detect I
0 = The received address bit n is not used to detect I
MSK<0>: Mask bit for I
I
1 = The received address bit 0 is compared to SSPADD<0> to detect I
0 = The received address bit 0 is not used to detect I
I
2
2
C Slave mode, 10-bit address (SSPM<3:0> = 0111 or 1111):
C Slave mode, 7-bit address, the bit is ignored
R/W-0/0
R/W-1/1
SSPMSK: SSP MASK REGISTER
SSPADD: MSSP ADDRESS AND BAUD RATE REGISTER (I
W = Writable bit
x = Bit is unknown
‘0’ = Bit is cleared
W = Writable bit
x = Bit is unknown
‘0’ = Bit is cleared
R/W-0/0
R/W-1/1
2
C Slave mode, 10-bit Address
2
C specification and must be equal to ‘11110’. However, those bits are
R/W-1/1
R/W-0/0
ADD<7:0>
MSK<7:0>
U = Unimplemented bit, read as ‘0’
-n/n = Value at POR and BOR/Value at all other Resets
U = Unimplemented bit, read as ‘0’
-n/n = Value at POR and BOR/Value at all other Resets
OSC
R/W-1/1
R/W-0/0
2
2
C address match
C address match
R/W-1/1
R/W-0/0
 2008-2011 Microchip Technology Inc.
2
2
C address match
C address match
R/W-0/0
R/W-1/1
2
C MODE)
R/W-0/0
R/W-1/1
bit 0
bit 0