PIC16LF1828-E/ML Microchip Technology, PIC16LF1828-E/ML Datasheet - Page 145

• Manufacturer Part Number: PIC16LF1828-E/ML
• Description: 7 KB Flash, 256 Bytes RAM, 32 MHz Int. Osc, 18 I/0, Enhanced Mid Range Core, Nan
• Manufacturer: Microchip Technology
• Series: PIC® XLP™ 16Fr

Specifications of PIC16LF1828-E/ML

• Core Processor: PIC
• Core Size: 8-Bit
• Speed: 32MHz
• Connectivity: I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 17
• Program Memory Size: 7KB (4K x 14)
• Program Memory Type: FLASH
• Eeprom Size: 256 x 8
• Ram Size: 256 x 8
• Voltage - Supply (vcc/vdd): 1.8 V ~ 3.6 V
• Data Converters: A/D 12x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 20-VFQFN Exposed Pad
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

14.0
The Fixed Voltage Reference (FVR), is a stable voltage
reference, independent of V
4.096V selectable output levels. The output of the FVR
can be configured to supply a reference voltage to the
following:
• ADC input channel
• ADC positive reference
• Comparator positive input
• Digital-to-Analog Converter (DAC)
The FVR can be enabled by setting the FVREN bit of
the FVRCON register.
FIGURE 14-1:
 2010 Microchip Technology Inc.
FIXED VOLTAGE REFERENCE
(FVR)
VOLTAGE REFERENCE BLOCK DIAGRAM
CDAFVR<1:0>
ADFVR<1:0>
DD
, with 1.024V, 2.048V or
FVRRDY
FVREN
2
2
+
_
Preliminary
X
X
X
X
X
X
1.024V Fixed
Reference
1
2
4
1
2
4
14.1
The output of the FVR supplied to the ADC,
Comparators, and DAC is routed through two
independent programmable gain amplifiers. Each
amplifier can be configured to amplify the reference
voltage by 1x, 2x or 4x, to produce the three possible
voltage levels.
The ADFVR<1:0> bits of the FVRCON register are
used to enable and configure the gain amplifier settings
for the reference supplied to the ADC module. Refer-
ence
(ADC) Module”
The CDAFVR<1:0> bits of the FVRCON register are
used to enable and configure the gain amplifier settings
for the reference supplied to the DAC and comparator
module. Reference
Converter (DAC) Module”
parator Module”
14.2
When the Fixed Voltage Reference module is enabled, it
requires time for the reference and amplifier circuits to
stabilize. Once the circuits stabilize and are ready for use,
the FVRRDY bit of the FVRCON register will be set. See
Section 30.0 “Electrical Specifications”
minimum delay requirement.
PIC16(L)F1824/1828
Section 16.0 “Analog-to-Digital Converter
Independent Gain Amplifiers
FVR Stabilization Period
(To Comparators, DAC)
(To ADC Module)
FVR BUFFER1
FVR BUFFER2
for additional information.
for additional information.
Section 17.0 “Digital-to-Analog
and
Section 19.0 “Com-
DS41419B-page 145
for the